WebRTCRTPSender

gstreamer_webrtc

Struct WebRTCRTPSender 

Source 
pub struct WebRTCRTPSender { /* private fields */ }
Expand description

An object to track the sending aspect of the stream

Mostly matches the WebRTC RTCRtpSender interface.

§Properties

§priority

The priority from which to set the DSCP field on packets

Readable | Writeable

§transport

The DTLS transport for this sender

Readable

Object
§name

Readable | Writeable | Construct

§parent

The parent of the object. Please note, that when changing the ‘parent’ property, we don’t emit notify and deep-notify signals due to locking issues. In some cases one can use GstBin::element-added or GstBin::element-removed signals on the parent to achieve a similar effect.

Readable | Writeable

§Implements

gst::prelude::ObjectExt, [trait@glib::ObjectExt]

GLib type: GObject with reference counted clone semantics.

Implementations§

Source§

impl WebRTCRTPSender

Source

pub fn set_priority(&self, priority: WebRTCPriorityType)

Sets the content of the IPv4 Type of Service (ToS), also known as DSCP (Differentiated Services Code Point). This also sets the Traffic Class field of IPv6.

§priority

The priority of this sender

Source

pub fn priority(&self) -> WebRTCPriorityType

The priority from which to set the DSCP field on packets

Source

pub fn transport(&self) -> Option<WebRTCDTLSTransport>

The DTLS transport for this sender

Source

pub fn connect_priority_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

Source

pub fn connect_transport_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId

Trait Implementations§

Source§

impl Clone for WebRTCRTPSender

Source§

fn clone(&self) -> Self

Makes a clone of this shared reference.

This increments the strong reference count of the object. Dropping the object will decrement it again.

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for WebRTCRTPSender

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl HasParamSpec for WebRTCRTPSender

Source§

type ParamSpec = ParamSpecObject

Source§

type SetValue = WebRTCRTPSender

Preferred value to be used as setter for the associated ParamSpec.
Source§

type BuilderFn = fn(&str) -> ParamSpecObjectBuilder<'_, WebRTCRTPSender>

Source§

fn param_spec_builder() -> Self::BuilderFn

Source§

impl Hash for WebRTCRTPSender

Source§

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Hashes the memory address of this object.

1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
Source§

impl Ord for WebRTCRTPSender

Source§

fn cmp(&self, other: &Self) -> Ordering

Comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.21.0 · Source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · Source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · Source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more
Source§

impl ParentClassIs for WebRTCRTPSender

Source§

type Parent = Object

Source§

impl<OT: ObjectType> PartialEq<OT> for WebRTCRTPSender

Source§

fn eq(&self, other: &OT) -> bool

Equality for two GObjects.

Two GObjects are equal if their memory addresses are equal.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl<OT: ObjectType> PartialOrd<OT> for WebRTCRTPSender

Source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

Partial comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.0.0 · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
Source§

impl StaticType for WebRTCRTPSender

Source§

fn static_type() -> Type

Returns the type identifier of Self.
Source§

impl Eq for WebRTCRTPSender

Source§

impl IsA<Object> for WebRTCRTPSender

Source§

impl Send for WebRTCRTPSender

Source§

impl Sync for WebRTCRTPSender

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> Cast for T
where T: ObjectType,

Source§

fn upcast<T>(self) -> T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
Source§

fn upcast_ref<T>(&self) -> &T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
Source§

fn downcast<T>(self) -> Result<T, Self>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a subclass or interface implementor T. Read more
Source§

fn downcast_ref<T>(&self) -> Option<&T>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
Source§

fn dynamic_cast<T>(self) -> Result<T, Self>
where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
Source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>
where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
Source§

unsafe fn unsafe_cast<T>(self) -> T
where T: ObjectType,

Casts to T unconditionally. Read more
Source§

unsafe fn unsafe_cast_ref<T>(&self) -> &T
where T: ObjectType,

Casts to &T unconditionally. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(_: *const GList, _: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GList, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GPtrArray, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize, ) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GPtrArray, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize, ) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

impl<O> GObjectExtManualGst for O
where O: IsA<Object>,

Source§

fn set_property_from_str(&self, name: &str, value: &str)

Source§

impl<O> GstObjectExt for O
where O: IsA<Object>,

Source§

fn add_control_binding( &self, binding: &impl IsA<ControlBinding>, ) -> Result<(), BoolError>

Attach the ControlBinding to the object. If there already was a ControlBinding for this property it will be replaced. Read more
Source§

fn default_error(&self, error: &Error, debug: Option<&str>)

A default error function that uses g_printerr() to display the error message and the optional debug string.. Read more
Source§

fn control_binding(&self, property_name: &str) -> Option<ControlBinding>

Gets the corresponding ControlBinding for the property. This should be unreferenced again after use. Read more
Source§

fn control_rate(&self) -> Option<ClockTime>

Obtain the control-rate for this self. Audio processing Element objects will use this rate to sub-divide their processing loop and call sync_values() in between. The length of the processing segment should be up to control-rate nanoseconds. Read more
Source§

fn name(&self) -> GString

Returns a copy of the name of self. Caller should g_free() the return value after usage. For a nameless object, this returns None, which you can safely g_free() as well. Read more
Source§

fn parent(&self) -> Option<Object>

Returns the parent of self. This function increases the refcount of the parent object so you should gst_object_unref() it after usage. Read more
Source§

fn path_string(&self) -> GString

Generates a string describing the path of self in the object hierarchy. Only useful (or used) for debugging. Read more
Source§

fn value( &self, property_name: &str, timestamp: impl Into<Option<ClockTime>>, ) -> Option<Value>

Gets the value for the given controlled property at the requested time. Read more
Source§

fn has_active_control_bindings(&self) -> bool

Check if the self has active controlled properties. Read more
Source§

fn has_ancestor(&self, ancestor: &impl IsA<Object>) -> bool

Check if self has an ancestor ancestor somewhere up in the hierarchy. One can e.g. check if a Element is inside a Pipeline. Read more
Source§

fn has_as_ancestor(&self, ancestor: &impl IsA<Object>) -> bool

Check if self has an ancestor ancestor somewhere up in the hierarchy. One can e.g. check if a Element is inside a Pipeline. Read more
Source§

fn has_as_parent(&self, parent: &impl IsA<Object>) -> bool

Check if parent is the parent of self. E.g. a Element can check if it owns a given Pad. Read more
Source§

fn remove_control_binding(&self, binding: &impl IsA<ControlBinding>) -> bool

Removes the corresponding ControlBinding. If it was the last ref of the binding, it will be disposed. Read more
Source§

fn set_control_binding_disabled(&self, property_name: &str, disabled: bool)

This function is used to disable the control bindings on a property for some time, i.e. sync_values() will do nothing for the property. Read more
Source§

fn set_control_bindings_disabled(&self, disabled: bool)

This function is used to disable all controlled properties of the self for some time, i.e. sync_values() will do nothing. Read more
Source§

fn set_control_rate(&self, control_rate: impl Into<Option<ClockTime>>)

Change the control-rate for this self. Audio processing Element objects will use this rate to sub-divide their processing loop and call sync_values() in between. The length of the processing segment should be up to control-rate nanoseconds. Read more
Source§

fn set_parent(&self, parent: &impl IsA<Object>) -> Result<(), BoolError>

Sets the parent of self to parent. The object’s reference count will be incremented, and any floating reference will be removed (see gst_object_ref_sink()). Read more
Source§

fn suggest_next_sync(&self) -> Option<ClockTime>

Returns a suggestion for timestamps where buffers should be split to get best controller results. Read more
Source§

fn sync_values(&self, timestamp: ClockTime) -> Result<(), BoolError>

Sets the properties of the object, according to the GstControlSources that (maybe) handle them and for the given timestamp. Read more
Source§

fn unparent(&self)

Clear the parent of self, removing the associated reference. This function decreases the refcount of self. Read more
Source§

fn connect_parent_notify<F>(&self, f: F) -> SignalHandlerId
where F: Fn(&Self) + Send + Sync + 'static,

Source§

impl<O> GstObjectExtManual for O
where O: IsA<Object>,

Source§

fn connect_deep_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&Self, &Object, &ParamSpec) + Send + Sync + 'static,

Source§

fn set_object_flags(&self, flags: ObjectFlags)

Source§

fn unset_object_flags(&self, flags: ObjectFlags)

Source§

fn object_flags(&self) -> ObjectFlags

Source§

fn g_value_array( &self, property_name: &str, timestamp: ClockTime, interval: ClockTime, values: &mut [Value], ) -> Result<(), BoolError>

Source§

fn object_lock(&self) -> ObjectLockGuard<'_, Self>

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

Source§

fn into_closure_return_value(self) -> Option<Value>

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<U> IsSubclassableExt for U
where U: IsClass + ParentClassIs,

Source§

fn parent_class_init<T>(class: &mut Class<U>)
where T: ObjectSubclass, <U as ParentClassIs>::Parent: IsSubclassable<T>,

Source§

fn parent_instance_init<T>(instance: &mut InitializingObject<T>)
where T: ObjectSubclass, <U as ParentClassIs>::Parent: IsSubclassable<T>,

Source§

impl<T> ObjectExt for T
where T: ObjectType,

Source§

fn is<U>(&self) -> bool
where U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
Source§

fn type_(&self) -> Type

Returns the type of the object.
Source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
Source§

fn class(&self) -> &Class<T>
where T: IsClass,

Returns the class of the object.
Source§

fn class_of<U>(&self) -> Option<&Class<U>>
where U: IsClass,

Returns the class of the object in the given type T. Read more
Source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>
where U: IsInterface,

Returns the interface T of the object. Read more
Source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
Source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
Source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
Source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
Source§

fn property<V>(&self, property_name: &str) -> V
where V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
Source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
Source§

fn has_property(&self, property_name: &str) -> bool

Check if the object has a property property_name.
Source§

fn has_property_with_type(&self, property_name: &str, type_: Type) -> bool

Check if the object has a property property_name of the given type_.
Source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
Source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
Source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
Source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
Source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
Source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
Source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
Source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
Source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
Source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
Source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
Source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
Source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
Source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
Source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
Source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
Source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
Source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
Source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
Source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
Source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> R
where R: TryFromClosureReturnValue,

Emit signal by signal id. Read more
Source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
Source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> R
where R: TryFromClosureReturnValue,

Emit signal by its name. Read more
Source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value], ) -> Option<Value>

Emit signal by its name. Read more
Source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue], ) -> R
where R: TryFromClosureReturnValue,

Emit signal by its name with details. Read more
Source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value], ) -> Option<Value>

Emit signal by its name with details. Read more
Source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue], ) -> R
where R: TryFromClosureReturnValue,

Emit signal by signal id with details. Read more
Source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value], ) -> Option<Value>

Emit signal by signal id with details. Read more
Source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
Source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
Source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
Source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F, ) -> SignalHandlerId
where F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
Source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
Source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
Source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
Source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
Source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
Source§

fn bind_property<'a, 'f, 't, O>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str, ) -> BindingBuilder<'a, 'f, 't>
where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
Source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
Source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
Source§

impl<T> Property for T
where T: HasParamSpec,

Source§

type Value = T

Source§

impl<T> PropertyGet for T
where T: HasParamSpec,

Source§

type Value = T

Source§

fn get<R, F>(&self, f: F) -> R
where F: Fn(&<T as PropertyGet>::Value) -> R,

Source§

impl<T> StaticTypeExt for T
where T: StaticType,

Source§

fn ensure_type()

Ensures that the type has been registered with the type system.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToSendValue for T
where T: Send + ToValue + ?Sized,

Source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
Source§

impl<T> TransparentType for T
where T: TransparentPtrType,

Source§

type GlibType = <T as GlibPtrDefault>::GlibType

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T> TryFromClosureReturnValue for T
where T: for<'a> FromValue<'a> + StaticType + 'static,

Source§

fn try_from_closure_return_value(v: Option<Value>) -> Result<T, BoolError>

Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<'a, T, C, E> FromValueOptional<'a> for T
where T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,

Source§

impl<Super, Sub> MayDowncastTo<Sub> for Super
where Super: IsA<Super>, Sub: IsA<Super>,