Struct RTPBase
Source pub struct RTPBaseDepayload { /* private fields */ }Expand description
Provides a base class for RTP depayloaders
In order to handle RTP header extensions correctly if the
depayloader aggregates multiple RTP packet payloads into one output
buffer this class provides the function
RTPBaseDepayloadExt::set_aggregate_hdrext_enabled(). If the
aggregation is enabled the virtual functions
RTPBaseDepayload or
RTPBaseDepayload must tell the base class
what happens to the current RTP packet. By default the base class
assumes that the packet payload is used with the next output
buffer.
If the RTP packet will not be used with an output buffer
RTPBaseDepayloadExt::dropped() must be called. A typical
situation would be if we are waiting for a keyframe.
If the RTP packet will be used but not with the current output
buffer but with the next one RTPBaseDepayloadExt::delayed() must
be called. This may happen if the current RTP packet signals the
start of a new output buffer and the currently processed output
buffer will be pushed first. The undelay happens implicitly once
the current buffer has been pushed or
RTPBaseDepayloadExt::flush() has been called.
If RTPBaseDepayloadExt::flush() is called all RTP packets that
have not been dropped since the last output buffer are dropped,
e.g. if an output buffer is discarded due to malformed data. This
may or may not include the current RTP packet depending on the 2nd
parameter keep_current.
Be aware that in case RTPBaseDepayloadExt::push_list() is used
each buffer will see the same list of RTP header extensions.
This is an Abstract Base Class, you cannot instantiate it.
§Properties
§auto-header-extension
If enabled, the depayloader will automatically try to enable all the RTP header extensions provided in the sink caps, saving the application the need to handle these extensions manually using the GstRTPBaseDepayload::request-extension: signal.
Readable | Writeable
§extensions
A list of already enabled RTP header extensions. This may be useful for finding out which extensions are already enabled (with add-extension signal) and picking a non-conflicting ID for a new extension that needs to be added on top of the existing ones.
Note that the value returned by reading this property is not dynamically updated when the set of enabled extensions changes by any of existing action signals. Rather, it represents the current state at the time the property is read.
Dynamic updates of this property can be received by subscribing to its corresponding “notify” signal, i.e. “notify::extensions”.
Readable
§max-reorder
Max seqnum reorder before the sender is assumed to have restarted.
When max-reorder is set to 0 all reordered/duplicate packets are considered coming from a restarted sender.
Readable | Writeable
§source-info
Add RTP source information found in RTP header as meta to output buffer.
Readable | Writeable
§stats
Various depayloader statistics retrieved atomically (and are therefore synchroized with each other). This property return a GstStructure named application/x-rtp-depayload-stats containing the following fields relating to the last processed buffer and current state of the stream being depayloaded:
clock-rate:G_TYPE_UINT, clock-rate of the streamnpt-start:G_TYPE_UINT64, time of playback startnpt-stop:G_TYPE_UINT64, time of playback stopplay-speed:G_TYPE_DOUBLE, the playback speedplay-scale:G_TYPE_DOUBLE, the playback scalerunning-time-dts:G_TYPE_UINT64, the last running-time of the last DTSrunning-time-pts:G_TYPE_UINT64, the last running-time of the last PTSseqnum:G_TYPE_UINT, the last seen seqnumtimestamp:G_TYPE_UINT, the last seen RTP timestamp
Readable
Object
§name
Readable | Writeable | Construct
§parent
The parent of the object. Please note, that when changing the ‘parent’
property, we don’t emit GObject::notify and [deep-notify][struct@crate::gst::Object#deep-notify]
signals due to locking issues. In some cases one can use
GstBin::element-added or GstBin::element-removed signals on the parent to
achieve a similar effect.
Readable | Writeable
§Signals
§add-extension
Add ext as an extension for reading part of an RTP header extension from
incoming RTP packets.
Action
§clear-extensions
Clear all RTP header extensions used by this depayloader.
Action
§request-extension
The returned ext must be configured with the correct ext_id and with the
necessary attributes as required by the extension implementation.
Element
§no-more-pads
This signals that the element will not generate more dynamic pads. Note that this signal will usually be emitted from the context of the streaming thread.
§pad-added
a new GstPad has been added to the element. Note that this signal will
usually be emitted from the context of the streaming thread. Also keep in
mind that if you add new elements to the pipeline in the signal handler
you will need to set them to the desired target state with
[ElementExtManual::set_state()][crate::gst::prelude::ElementExtManual::set_state()] or [ElementExtManual::sync_state_with_parent()][crate::gst::prelude::ElementExtManual::sync_state_with_parent()].
§pad-removed
a GstPad has been removed from the element
Object
§deep-notify
The deep notify signal is used to be notified of property changes. It is typically attached to the toplevel bin to receive notifications from all the elements contained in that bin.
Detailed
§Implements
RTPBaseDepayloadExt, [trait@gst::prelude::ElementExt], gst::prelude::ObjectExt, RTPBaseDepayloadExtManual
GLib type: GObject with reference counted clone semantics.
Implementations§
Source§impl RTPBaseDepayload
impl RTPBaseDepayload
pub const NONE: Option<&'static RTPBaseDepayload> = None
Trait Implementations§
Source§impl Clone for RTPBaseDepayload
impl Clone for RTPBaseDepayload
Source§impl Debug for RTPBaseDepayload
impl Debug for RTPBaseDepayload
Source§impl HasParamSpec for RTPBaseDepayload
impl HasParamSpec for RTPBaseDepayload
type ParamSpec = ParamSpecObject
Source§type SetValue = RTPBaseDepayload
type SetValue = RTPBaseDepayload
Preferred value to be used as setter for the associated ParamSpec.
type BuilderFn = fn(&str) -> ParamSpecObjectBuilder<'_, RTPBaseDepayload>
fn param_spec_builder() -> Self::BuilderFn
Source§impl Hash for RTPBaseDepayload
impl Hash for RTPBaseDepayload
Source§impl<T: RTPBaseDepayloadImpl> IsSubclassable<T> for RTPBaseDepayload
impl<T: RTPBaseDepayloadImpl> IsSubclassable<T> for RTPBaseDepayload
Source§fn class_init(klass: &mut Class<Self>)
fn class_init(klass: &mut Class<Self>)
Override the virtual methods of this class for the given subclass and do other class
initialization. Read more
Source§fn instance_init(instance: &mut InitializingObject<T>)
fn instance_init(instance: &mut InitializingObject<T>)
Instance specific initialization. Read more
Source§impl Ord for RTPBaseDepayload
impl Ord for RTPBaseDepayload
Source§fn cmp(&self, other: &Self) -> Ordering
fn cmp(&self, other: &Self) -> Ordering
Comparison for two GObjects.
Compares the memory addresses of the provided objects.
1.21.0 · Source§fn max(self, other: Self) -> Selfwhere
Self: Sized,
fn max(self, other: Self) -> Selfwhere
Self: Sized,
Compares and returns the maximum of two values. Read more
Source§impl ParentClassIs for RTPBaseDepayload
impl ParentClassIs for RTPBaseDepayload
Source§impl<OT: ObjectType> PartialEq<OT> for RTPBaseDepayload
impl<OT: ObjectType> PartialEq<OT> for RTPBaseDepayload
Source§impl<OT: ObjectType> PartialOrd<OT> for RTPBaseDepayload
impl<OT: ObjectType> PartialOrd<OT> for RTPBaseDepayload
Source§impl StaticType for RTPBaseDepayload
impl StaticType for RTPBaseDepayload
Source§fn static_type() -> Type
fn static_type() -> Type
Returns the type identifier of
Self.impl Eq for RTPBaseDepayload
impl IsA<Element> for RTPBaseDepayload
impl IsA<Object> for RTPBaseDepayload
impl Send for RTPBaseDepayload
impl Sync for RTPBaseDepayload
Auto Trait Implementations§
impl Freeze for RTPBaseDepayload
impl RefUnwindSafe for RTPBaseDepayload
impl Unpin for RTPBaseDepayload
impl UnwindSafe for RTPBaseDepayload
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
Source§impl<T> Cast for Twhere
T: ObjectType,
impl<T> Cast for Twhere
T: ObjectType,
Source§fn upcast<T>(self) -> Twhere
T: ObjectType,
Self: IsA<T>,
fn upcast<T>(self) -> Twhere
T: ObjectType,
Self: IsA<T>,
Upcasts an object to a superclass or interface
T. Read moreSource§fn upcast_ref<T>(&self) -> &Twhere
T: ObjectType,
Self: IsA<T>,
fn upcast_ref<T>(&self) -> &Twhere
T: ObjectType,
Self: IsA<T>,
Upcasts an object to a reference of its superclass or interface
T. Read moreSource§fn downcast<T>(self) -> Result<T, Self>where
T: ObjectType,
Self: MayDowncastTo<T>,
fn downcast<T>(self) -> Result<T, Self>where
T: ObjectType,
Self: MayDowncastTo<T>,
Tries to downcast to a subclass or interface implementor
T. Read moreSource§fn downcast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Self: MayDowncastTo<T>,
fn downcast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Self: MayDowncastTo<T>,
Tries to downcast to a reference of its subclass or interface implementor
T. Read moreSource§fn dynamic_cast<T>(self) -> Result<T, Self>where
T: ObjectType,
fn dynamic_cast<T>(self) -> Result<T, Self>where
T: ObjectType,
Tries to cast to an object of type
T. This handles upcasting, downcasting
and casting between interface and interface implementors. All checks are performed at
runtime, while upcast will do many checks at compile-time already. downcast will
perform the same checks at runtime as dynamic_cast, but will also ensure some amount of
compile-time safety. Read moreSource§fn dynamic_cast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
fn dynamic_cast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Tries to cast to reference to an object of type
T. This handles upcasting, downcasting
and casting between interface and interface implementors. All checks are performed at
runtime, while downcast and upcast will do many checks at compile-time already. Read moreSource§unsafe fn unsafe_cast<T>(self) -> Twhere
T: ObjectType,
unsafe fn unsafe_cast<T>(self) -> Twhere
T: ObjectType,
Casts to
T unconditionally. Read moreSource§unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere
T: ObjectType,
unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere
T: ObjectType,
Casts to
&T unconditionally. Read moreSource§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<O> ElementExt for Owhere
O: IsA<Element>,
impl<O> ElementExt for Owhere
O: IsA<Element>,
§fn abort_state(&self)
fn abort_state(&self)
Abort the state change of the element. This function is used
by elements that do asynchronous state changes and find out
something is wrong. Read more
§fn add_pad(&self, pad: &impl IsA<Pad>) -> Result<(), BoolError>
fn add_pad(&self, pad: &impl IsA<Pad>) -> Result<(), BoolError>
Adds a pad (link point) to
self. pad’s parent will be set to self;
see [GstObjectExt::set_parent()][crate::prelude::GstObjectExt::set_parent()] for refcounting information. Read more§fn change_state(
&self,
transition: StateChange,
) -> Result<StateChangeSuccess, StateChangeError>
fn change_state( &self, transition: StateChange, ) -> Result<StateChangeSuccess, StateChangeError>
§fn continue_state(
&self,
ret: impl Into<StateChangeReturn>,
) -> Result<StateChangeSuccess, StateChangeError>
fn continue_state( &self, ret: impl Into<StateChangeReturn>, ) -> Result<StateChangeSuccess, StateChangeError>
Commit the state change of the element and proceed to the next
pending state if any. This function is used
by elements that do asynchronous state changes.
The core will normally call this method automatically when an
element returned [
StateChangeReturn::Success][crate::StateChangeReturn::Success] from the state change function. Read more§fn create_all_pads(&self)
fn create_all_pads(&self)
Creates a pad for each pad template that is always available.
This function is only useful during object initialization of
subclasses of [
Element][crate::Element].§fn decorate_stream_id(&self, stream_id: &str) -> GString
fn decorate_stream_id(&self, stream_id: &str) -> GString
§fn base_time(&self) -> Option<ClockTime>
fn base_time(&self) -> Option<ClockTime>
Returns the base time of the element. The base time is the
absolute time of the clock when this element was last put to
PLAYING. Subtracting the base time from the clock time gives
the running time of the element. Read more
§fn bus(&self) -> Option<Bus>
fn bus(&self) -> Option<Bus>
Returns the bus of the element. Note that only a [
Pipeline][crate::Pipeline] will provide a
bus for the application. Read more§fn clock(&self) -> Option<Clock>
fn clock(&self) -> Option<Clock>
Gets the currently configured clock of the element. This is the clock as was
last set with [
set_clock()][Self::set_clock()]. Read more§fn compatible_pad(
&self,
pad: &impl IsA<Pad>,
caps: Option<&Caps>,
) -> Option<Pad>
fn compatible_pad( &self, pad: &impl IsA<Pad>, caps: Option<&Caps>, ) -> Option<Pad>
Looks for an unlinked pad to which the given pad can link. It is not
guaranteed that linking the pads will work, though it should work in most
cases. Read more
§fn compatible_pad_template(
&self,
compattempl: &PadTemplate,
) -> Option<PadTemplate>
fn compatible_pad_template( &self, compattempl: &PadTemplate, ) -> Option<PadTemplate>
Retrieves a pad template from
self that is compatible with compattempl.
Pads from compatible templates can be linked together. Read more§fn context(&self, context_type: &str) -> Option<Context>
fn context(&self, context_type: &str) -> Option<Context>
Gets the context with
context_type set on the element or NULL. Read more§fn factory(&self) -> Option<ElementFactory>
fn factory(&self) -> Option<ElementFactory>
Retrieves the factory that was used to create this element. Read more
§fn start_time(&self) -> Option<ClockTime>
fn start_time(&self) -> Option<ClockTime>
Returns the start time of the element. The start time is the
running time of the clock when this element was last put to PAUSED. Read more
§fn state(
&self,
timeout: impl Into<Option<ClockTime>>,
) -> (Result<StateChangeSuccess, StateChangeError>, State, State)
fn state( &self, timeout: impl Into<Option<ClockTime>>, ) -> (Result<StateChangeSuccess, StateChangeError>, State, State)
Gets the state of the element. Read more
§fn static_pad(&self, name: &str) -> Option<Pad>
fn static_pad(&self, name: &str) -> Option<Pad>
Retrieves a pad from
self by name. This version only retrieves
already-existing (i.e. ‘static’) pads. Read more§fn is_locked_state(&self) -> bool
fn is_locked_state(&self) -> bool
Checks if the state of an element is locked.
If the state of an element is locked, state changes of the parent don’t
affect the element.
This way you can leave currently unused elements inside bins. Just lock their
state before changing the state from [
State::Null][crate::State::Null]. Read more§fn lost_state(&self)
fn lost_state(&self)
Brings the element to the lost state. The current state of the
element is copied to the pending state so that any call to
[
state()][Self::state()] will return [StateChangeReturn::Async][crate::StateChangeReturn::Async]. Read more§fn no_more_pads(&self)
fn no_more_pads(&self)
Use this function to signal that the element does not expect any more pads
to show up in the current pipeline. This function should be called whenever
pads have been added by the element itself. Elements with [
PadPresence::Sometimes][crate::PadPresence::Sometimes]
pad templates use this in combination with autopluggers to figure out that
the element is done initializing its pads. Read more§fn post_message(&self, message: Message) -> Result<(), BoolError>
fn post_message(&self, message: Message) -> Result<(), BoolError>
Post a message on the element’s [
Bus][crate::Bus]. This function takes ownership of the
message; if you want to access the message after this call, you should add an
additional reference before calling. Read more§fn provide_clock(&self) -> Option<Clock>
fn provide_clock(&self) -> Option<Clock>
Get the clock provided by the given element. Read more
§fn release_request_pad(&self, pad: &impl IsA<Pad>)
fn release_request_pad(&self, pad: &impl IsA<Pad>)
Makes the element free the previously requested pad as obtained
with [
request_pad()][Self::request_pad()]. Read more§fn remove_pad(&self, pad: &impl IsA<Pad>) -> Result<(), BoolError>
fn remove_pad(&self, pad: &impl IsA<Pad>) -> Result<(), BoolError>
Removes
pad from self. pad will be destroyed if it has not been
referenced elsewhere using [GstObjectExt::unparent()][crate::prelude::GstObjectExt::unparent()]. Read more§fn request_pad(
&self,
templ: &PadTemplate,
name: Option<&str>,
caps: Option<&Caps>,
) -> Option<Pad>
fn request_pad( &self, templ: &PadTemplate, name: Option<&str>, caps: Option<&Caps>, ) -> Option<Pad>
Retrieves a request pad from the element according to the provided template.
Pad templates can be looked up using
[
ElementFactory::static_pad_templates()][crate::ElementFactory::static_pad_templates()]. Read more§fn set_base_time(&self, time: ClockTime)
fn set_base_time(&self, time: ClockTime)
Set the base time of an element. See [
base_time()][Self::base_time()]. Read more§fn set_bus(&self, bus: Option<&Bus>)
fn set_bus(&self, bus: Option<&Bus>)
Sets the bus of the element. Increases the refcount on the bus.
For internal use only, unless you’re testing elements. Read more
§fn set_clock(&self, clock: Option<&impl IsA<Clock>>) -> Result<(), BoolError>
fn set_clock(&self, clock: Option<&impl IsA<Clock>>) -> Result<(), BoolError>
Sets the clock for the element. This function increases the
refcount on the clock. Any previously set clock on the object
is unreffed. Read more
§fn set_context(&self, context: &Context)
fn set_context(&self, context: &Context)
Sets the context of the element. Increases the refcount of the context. Read more
§fn set_locked_state(&self, locked_state: bool) -> bool
fn set_locked_state(&self, locked_state: bool) -> bool
Locks the state of an element, so state changes of the parent don’t affect
this element anymore. Read more
§fn set_start_time(&self, time: impl Into<Option<ClockTime>>)
fn set_start_time(&self, time: impl Into<Option<ClockTime>>)
Set the start time of an element. The start time of the element is the
running time of the element when it last went to the PAUSED state. In READY
or after a flushing seek, it is set to 0. Read more
§fn set_state(
&self,
state: State,
) -> Result<StateChangeSuccess, StateChangeError>
fn set_state( &self, state: State, ) -> Result<StateChangeSuccess, StateChangeError>
Sets the state of the element. This function will try to set the
requested state by going through all the intermediary states and calling
the class’s state change function for each. Read more
§fn sync_state_with_parent(&self) -> Result<(), BoolError>
fn sync_state_with_parent(&self) -> Result<(), BoolError>
§fn unlink(&self, dest: &impl IsA<Element>)
fn unlink(&self, dest: &impl IsA<Element>)
Unlinks all source pads of the source element with all sink pads
of the sink element to which they are linked. Read more
§fn unlink_pads(
&self,
srcpadname: &str,
dest: &impl IsA<Element>,
destpadname: &str,
)
fn unlink_pads( &self, srcpadname: &str, dest: &impl IsA<Element>, destpadname: &str, )
Unlinks the two named pads of the source and destination elements. Read more
§fn connect_no_more_pads<F>(&self, f: F) -> SignalHandlerId
fn connect_no_more_pads<F>(&self, f: F) -> SignalHandlerId
This signals that the element will not generate more dynamic pads.
Note that this signal will usually be emitted from the context of
the streaming thread.
§fn connect_pad_added<F>(&self, f: F) -> SignalHandlerId
fn connect_pad_added<F>(&self, f: F) -> SignalHandlerId
a new [
Pad][crate::Pad] has been added to the element. Note that this signal will
usually be emitted from the context of the streaming thread. Also keep in
mind that if you add new elements to the pipeline in the signal handler
you will need to set them to the desired target state with
[set_state()][Self::set_state()] or [sync_state_with_parent()][Self::sync_state_with_parent()]. Read more§fn connect_pad_removed<F>(&self, f: F) -> SignalHandlerId
fn connect_pad_removed<F>(&self, f: F) -> SignalHandlerId
a [
Pad][crate::Pad] has been removed from the element Read more§impl<O> ElementExtManual for Owhere
O: IsA<Element>,
impl<O> ElementExtManual for Owhere
O: IsA<Element>,
fn element_class(&self) -> &Class<Element>
fn current_state(&self) -> State
fn pending_state(&self) -> State
§fn send_event(&self, event: impl Into<Event>) -> bool
fn send_event(&self, event: impl Into<Event>) -> bool
Sends an event to an element. If the element doesn’t implement an
event handler, the event will be pushed on a random linked sink pad for
downstream events or a random linked source pad for upstream events. Read more
§fn pad_template(&self, name: &str) -> Option<PadTemplate>
fn pad_template(&self, name: &str) -> Option<PadTemplate>
Retrieves a padtemplate from
self with the given name. Read more§fn pad_template_list(&self) -> List<PadTemplate>
fn pad_template_list(&self) -> List<PadTemplate>
Retrieves a list of the pad templates associated with
self. The
list must not be modified by the calling code. Read more§fn message_full<T>(
&self,
type_: ElementMessageType,
code: T,
message: Option<&str>,
debug: Option<&str>,
file: &str,
function: &str,
line: u32,
)where
T: MessageErrorDomain,
fn message_full<T>(
&self,
type_: ElementMessageType,
code: T,
message: Option<&str>,
debug: Option<&str>,
file: &str,
function: &str,
line: u32,
)where
T: MessageErrorDomain,
Post an error, warning or info message on the bus from inside an element. Read more
fn set_element_flags(&self, flags: ElementFlags)
fn unset_element_flags(&self, flags: ElementFlags)
fn element_flags(&self) -> ElementFlags
§fn message_full_with_details<T>(
&self,
type_: ElementMessageType,
code: T,
message: Option<&str>,
debug: Option<&str>,
file: &str,
function: &str,
line: u32,
structure: Structure,
)where
T: MessageErrorDomain,
fn message_full_with_details<T>(
&self,
type_: ElementMessageType,
code: T,
message: Option<&str>,
debug: Option<&str>,
file: &str,
function: &str,
line: u32,
structure: Structure,
)where
T: MessageErrorDomain,
Post an error, warning or info message on the bus from inside an element. Read more
fn post_error_message(&self, msg: ErrorMessage)
§fn iterate_pads(&self) -> Iterator<Pad>
fn iterate_pads(&self) -> Iterator<Pad>
Retrieves an iterator of
self’s pads. The iterator should
be freed after usage. Also more specialized iterators exists such as
[iterate_src_pads()][Self::iterate_src_pads()] or [iterate_sink_pads()][Self::iterate_sink_pads()]. Read more§fn iterate_sink_pads(&self) -> Iterator<Pad>
fn iterate_sink_pads(&self) -> Iterator<Pad>
Retrieves an iterator of
self’s sink pads. Read more§fn iterate_src_pads(&self) -> Iterator<Pad>
fn iterate_src_pads(&self) -> Iterator<Pad>
Retrieves an iterator of
self’s source pads. Read morefn pads(&self) -> Vec<Pad>
fn sink_pads(&self) -> Vec<Pad>
fn src_pads(&self) -> Vec<Pad>
§fn foreach_pad<F>(&self, func: F)
fn foreach_pad<F>(&self, func: F)
Call
func with user_data for each of self’s pads. func will be called
exactly once for each pad that exists at the time of this call, unless
one of the calls to func returns false in which case we will stop
iterating pads and return early. If new pads are added or pads are removed
while pads are being iterated, this will not be taken into account until
next time this function is used. Read more§fn foreach_sink_pad<F>(&self, func: F)
fn foreach_sink_pad<F>(&self, func: F)
Call
func with user_data for each of self’s sink pads. func will be
called exactly once for each sink pad that exists at the time of this call,
unless one of the calls to func returns false in which case we will stop
iterating pads and return early. If new sink pads are added or sink pads
are removed while the sink pads are being iterated, this will not be taken
into account until next time this function is used. Read more§fn foreach_src_pad<F>(&self, func: F)
fn foreach_src_pad<F>(&self, func: F)
Call
func with user_data for each of self’s source pads. func will be
called exactly once for each source pad that exists at the time of this call,
unless one of the calls to func returns false in which case we will stop
iterating pads and return early. If new source pads are added or source pads
are removed while the source pads are being iterated, this will not be taken
into account until next time this function is used. Read morefn num_pads(&self) -> u16
fn num_sink_pads(&self) -> u16
fn num_src_pads(&self) -> u16
§fn add_property_deep_notify_watch(
&self,
property_name: Option<&str>,
include_value: bool,
) -> NotifyWatchId
fn add_property_deep_notify_watch( &self, property_name: Option<&str>, include_value: bool, ) -> NotifyWatchId
property_name Read more§fn add_property_notify_watch(
&self,
property_name: Option<&str>,
include_value: bool,
) -> NotifyWatchId
fn add_property_notify_watch( &self, property_name: Option<&str>, include_value: bool, ) -> NotifyWatchId
property_name Read more§fn remove_property_notify_watch(&self, watch_id: NotifyWatchId)
fn remove_property_notify_watch(&self, watch_id: NotifyWatchId)
watch_id Read more§fn query_convert<U>(&self, src_val: impl FormattedValue) -> Option<U>where
U: SpecificFormattedValueFullRange,
fn query_convert<U>(&self, src_val: impl FormattedValue) -> Option<U>where
U: SpecificFormattedValueFullRange,
fn query_convert_generic( &self, src_val: impl FormattedValue, dest_format: Format, ) -> Option<GenericFormattedValue>
§fn query_duration<T>(&self) -> Option<T>where
T: SpecificFormattedValueIntrinsic,
fn query_duration<T>(&self) -> Option<T>where
T: SpecificFormattedValueIntrinsic,
Queries an element (usually top-level pipeline or playbin element) for the
total stream duration in nanoseconds. This query will only work once the
pipeline is prerolled (i.e. reached PAUSED or PLAYING state). The application
will receive an ASYNC_DONE message on the pipeline bus when that is the case. Read more
fn query_duration_generic( &self, format: Format, ) -> Option<GenericFormattedValue>
§fn query_position<T>(&self) -> Option<T>where
T: SpecificFormattedValueIntrinsic,
fn query_position<T>(&self) -> Option<T>where
T: SpecificFormattedValueIntrinsic,
Queries an element (usually top-level pipeline or playbin element) for the
stream position in nanoseconds. This will be a value between 0 and the
stream duration (if the stream duration is known). This query will usually
only work once the pipeline is prerolled (i.e. reached PAUSED or PLAYING
state). The application will receive an ASYNC_DONE message on the pipeline
bus when that is the case. Read more
fn query_position_generic( &self, format: Format, ) -> Option<GenericFormattedValue>
§fn seek<V>(
&self,
rate: f64,
flags: SeekFlags,
start_type: SeekType,
start: V,
stop_type: SeekType,
stop: impl CompatibleFormattedValue<V>,
) -> Result<(), BoolError>where
V: FormattedValue,
fn seek<V>(
&self,
rate: f64,
flags: SeekFlags,
start_type: SeekType,
start: V,
stop_type: SeekType,
stop: impl CompatibleFormattedValue<V>,
) -> Result<(), BoolError>where
V: FormattedValue,
Sends a seek event to an element. See
gst_event_new_seek() for the details of
the parameters. The seek event is sent to the element using
[send_event()][Self::send_event()]. Read more§fn seek_simple(
&self,
seek_flags: SeekFlags,
seek_pos: impl FormattedValue,
) -> Result<(), BoolError>
fn seek_simple( &self, seek_flags: SeekFlags, seek_pos: impl FormattedValue, ) -> Result<(), BoolError>
Simple API to perform a seek on the given element, meaning it just seeks
to the given position relative to the start of the stream. For more complex
operations like segment seeks (e.g. for looping) or changing the playback
rate or seeking relative to the last configured playback segment you should
use [
seek()][Self::seek()]. Read more§fn call_async<F>(&self, func: F)
fn call_async<F>(&self, func: F)
Calls
func from another thread and passes user_data to it. This is to be
used for cases when a state change has to be performed from a streaming
thread, directly via [ElementExt::set_state()][crate::prelude::ElementExt::set_state()] or indirectly e.g. via SEEK
events. Read morefn call_async_future<F, T>( &self, func: F, ) -> Pin<Box<dyn Future<Output = T> + Send>>
§fn current_running_time(&self) -> Option<ClockTime>
fn current_running_time(&self) -> Option<ClockTime>
Returns the running time of the element. The running time is the
element’s clock time minus its base time. Will return GST_CLOCK_TIME_NONE
if the element has no clock, or if its base time has not been set. Read more
§fn current_clock_time(&self) -> Option<ClockTime>
fn current_clock_time(&self) -> Option<ClockTime>
Returns the current clock time of the element, as in, the time of the
element’s clock, or GST_CLOCK_TIME_NONE if there is no clock. Read more
§fn request_pad_simple(&self, name: &str) -> Option<Pad>
fn request_pad_simple(&self, name: &str) -> Option<Pad>
The name of this function is confusing to people learning GStreamer.
[
request_pad_simple()][Self::request_pad_simple()] aims at making it more explicit it is
a simplified [ElementExt::request_pad()][crate::prelude::ElementExt::request_pad()]. Read more§fn link(&self, dest: &impl IsA<Element>) -> Result<(), BoolError>
fn link(&self, dest: &impl IsA<Element>) -> Result<(), BoolError>
Links
self to dest. The link must be from source to
destination; the other direction will not be tried. The function looks for
existing pads that aren’t linked yet. It will request new pads if necessary.
Such pads need to be released manually when unlinking.
If multiple links are possible, only one is established. Read more§fn link_filtered(
&self,
dest: &impl IsA<Element>,
filter: &Caps,
) -> Result<(), BoolError>
fn link_filtered( &self, dest: &impl IsA<Element>, filter: &Caps, ) -> Result<(), BoolError>
Links
self to dest using the given caps as filtercaps.
The link must be from source to
destination; the other direction will not be tried. The function looks for
existing pads that aren’t linked yet. It will request new pads if necessary.
If multiple links are possible, only one is established. Read more§fn link_pads(
&self,
srcpadname: Option<&str>,
dest: &impl IsA<Element>,
destpadname: Option<&str>,
) -> Result<(), BoolError>
fn link_pads( &self, srcpadname: Option<&str>, dest: &impl IsA<Element>, destpadname: Option<&str>, ) -> Result<(), BoolError>
Links the two named pads of the source and destination elements.
Side effect is that if one of the pads has no parent, it becomes a
child of the parent of the other element. If they have different
parents, the link fails. Read more
§fn link_pads_filtered(
&self,
srcpadname: Option<&str>,
dest: &impl IsA<Element>,
destpadname: Option<&str>,
filter: &Caps,
) -> Result<(), BoolError>
fn link_pads_filtered( &self, srcpadname: Option<&str>, dest: &impl IsA<Element>, destpadname: Option<&str>, filter: &Caps, ) -> Result<(), BoolError>
Links the two named pads of the source and destination elements. Side effect
is that if one of the pads has no parent, it becomes a child of the parent of
the other element. If they have different parents, the link fails. If
caps
is not None, makes sure that the caps of the link is a subset of caps. Read more§fn link_pads_full(
&self,
srcpadname: Option<&str>,
dest: &impl IsA<Element>,
destpadname: Option<&str>,
flags: PadLinkCheck,
) -> Result<(), BoolError>
fn link_pads_full( &self, srcpadname: Option<&str>, dest: &impl IsA<Element>, destpadname: Option<&str>, flags: PadLinkCheck, ) -> Result<(), BoolError>
Links the two named pads of the source and destination elements.
Side effect is that if one of the pads has no parent, it becomes a
child of the parent of the other element. If they have different
parents, the link fails. Read more
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>
unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>
unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>
unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>
unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>
unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>
unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>
unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>
unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>
unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>
unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>
unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>
unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>
§impl<O> GObjectExtManualGst for O
impl<O> GObjectExtManualGst for O
fn set_property_from_str(&self, name: &str, value: &str)
§impl<O> GstObjectExt for Owhere
O: IsA<Object>,
impl<O> GstObjectExt for Owhere
O: IsA<Object>,
§fn add_control_binding(
&self,
binding: &impl IsA<ControlBinding>,
) -> Result<(), BoolError>
fn add_control_binding( &self, binding: &impl IsA<ControlBinding>, ) -> Result<(), BoolError>
Attach the [
ControlBinding][crate::ControlBinding] to the object. If there already was a
[ControlBinding][crate::ControlBinding] for this property it will be replaced. Read more§fn default_error(&self, error: &Error, debug: Option<&str>)
fn default_error(&self, error: &Error, debug: Option<&str>)
A default error function that uses
g_printerr() to display the error message
and the optional debug string.. Read more§fn control_binding(&self, property_name: &str) -> Option<ControlBinding>
fn control_binding(&self, property_name: &str) -> Option<ControlBinding>
Gets the corresponding [
ControlBinding][crate::ControlBinding] for the property. This should be
unreferenced again after use. Read more§fn control_rate(&self) -> Option<ClockTime>
fn control_rate(&self) -> Option<ClockTime>
Obtain the control-rate for this
self. Audio processing [Element][crate::Element]
objects will use this rate to sub-divide their processing loop and call
[sync_values()][Self::sync_values()] in between. The length of the processing segment
should be up to control-rate nanoseconds. Read more§fn parent(&self) -> Option<Object>
fn parent(&self) -> Option<Object>
Returns the parent of
self. This function increases the refcount
of the parent object so you should gst_object_unref() it after usage. Read more§fn path_string(&self) -> GString
fn path_string(&self) -> GString
Generates a string describing the path of
self in
the object hierarchy. Only useful (or used) for debugging. Read more§fn value(
&self,
property_name: &str,
timestamp: impl Into<Option<ClockTime>>,
) -> Option<Value>
fn value( &self, property_name: &str, timestamp: impl Into<Option<ClockTime>>, ) -> Option<Value>
Gets the value for the given controlled property at the requested time. Read more
§fn has_active_control_bindings(&self) -> bool
fn has_active_control_bindings(&self) -> bool
Check if the
self has active controlled properties. Read more§fn has_ancestor(&self, ancestor: &impl IsA<Object>) -> bool
fn has_ancestor(&self, ancestor: &impl IsA<Object>) -> bool
Check if
self has an ancestor ancestor somewhere up in
the hierarchy. One can e.g. check if a [Element][crate::Element] is inside a [Pipeline][crate::Pipeline]. Read more§fn has_as_ancestor(&self, ancestor: &impl IsA<Object>) -> bool
fn has_as_ancestor(&self, ancestor: &impl IsA<Object>) -> bool
Check if
self has an ancestor ancestor somewhere up in
the hierarchy. One can e.g. check if a [Element][crate::Element] is inside a [Pipeline][crate::Pipeline]. Read more§fn has_as_parent(&self, parent: &impl IsA<Object>) -> bool
fn has_as_parent(&self, parent: &impl IsA<Object>) -> bool
Check if
parent is the parent of self.
E.g. a [Element][crate::Element] can check if it owns a given [Pad][crate::Pad]. Read more§fn remove_control_binding(&self, binding: &impl IsA<ControlBinding>) -> bool
fn remove_control_binding(&self, binding: &impl IsA<ControlBinding>) -> bool
Removes the corresponding [
ControlBinding][crate::ControlBinding]. If it was the
last ref of the binding, it will be disposed. Read more§fn set_control_binding_disabled(&self, property_name: &str, disabled: bool)
fn set_control_binding_disabled(&self, property_name: &str, disabled: bool)
This function is used to disable the control bindings on a property for
some time, i.e. [
sync_values()][Self::sync_values()] will do nothing for the
property. Read more§fn set_control_bindings_disabled(&self, disabled: bool)
fn set_control_bindings_disabled(&self, disabled: bool)
This function is used to disable all controlled properties of the
self for
some time, i.e. [sync_values()][Self::sync_values()] will do nothing. Read more§fn set_control_rate(&self, control_rate: impl Into<Option<ClockTime>>)
fn set_control_rate(&self, control_rate: impl Into<Option<ClockTime>>)
Change the control-rate for this
self. Audio processing [Element][crate::Element]
objects will use this rate to sub-divide their processing loop and call
[sync_values()][Self::sync_values()] in between. The length of the processing segment
should be up to control-rate nanoseconds. Read more§fn set_parent(&self, parent: &impl IsA<Object>) -> Result<(), BoolError>
fn set_parent(&self, parent: &impl IsA<Object>) -> Result<(), BoolError>
Sets the parent of
self to parent. The object’s reference count will
be incremented, and any floating reference will be removed (see gst_object_ref_sink()). Read more§fn suggest_next_sync(&self) -> Option<ClockTime>
fn suggest_next_sync(&self) -> Option<ClockTime>
Returns a suggestion for timestamps where buffers should be split
to get best controller results. Read more
§fn sync_values(&self, timestamp: ClockTime) -> Result<(), BoolError>
fn sync_values(&self, timestamp: ClockTime) -> Result<(), BoolError>
Sets the properties of the object, according to the
GstControlSources that
(maybe) handle them and for the given timestamp. Read more§fn unparent(&self)
fn unparent(&self)
Clear the parent of
self, removing the associated reference.
This function decreases the refcount of self. Read morefn connect_parent_notify<F>(&self, f: F) -> SignalHandlerId
§impl<O> GstObjectExtManual for Owhere
O: IsA<Object>,
impl<O> GstObjectExtManual for Owhere
O: IsA<Object>,
fn connect_deep_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
fn set_object_flags(&self, flags: ObjectFlags)
fn unset_object_flags(&self, flags: ObjectFlags)
fn object_flags(&self) -> ObjectFlags
fn g_value_array( &self, property_name: &str, timestamp: ClockTime, interval: ClockTime, values: &mut [Value], ) -> Result<(), BoolError>
fn object_lock(&self) -> ObjectLockGuard<'_, Self>
Source§impl<T> IntoClosureReturnValue for T
impl<T> IntoClosureReturnValue for T
fn into_closure_return_value(self) -> Option<Value>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<U> IsSubclassableExt for Uwhere
U: IsClass + ParentClassIs,
impl<U> IsSubclassableExt for Uwhere
U: IsClass + ParentClassIs,
fn parent_class_init<T>(class: &mut Class<U>)
fn parent_instance_init<T>(instance: &mut InitializingObject<T>)
Source§impl<T> ObjectExt for Twhere
T: ObjectType,
impl<T> ObjectExt for Twhere
T: ObjectType,
Source§fn is<U>(&self) -> boolwhere
U: StaticType,
fn is<U>(&self) -> boolwhere
U: StaticType,
Returns
true if the object is an instance of (can be cast to) T.Source§fn object_class(&self) -> &Class<Object>
fn object_class(&self) -> &Class<Object>
Returns the
ObjectClass of the object. Read moreSource§fn class_of<U>(&self) -> Option<&Class<U>>where
U: IsClass,
fn class_of<U>(&self) -> Option<&Class<U>>where
U: IsClass,
Returns the class of the object in the given type
T. Read moreSource§fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where
U: IsInterface,
fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where
U: IsInterface,
Returns the interface
T of the object. Read moreSource§fn set_property_from_value(&self, property_name: &str, value: &Value)
fn set_property_from_value(&self, property_name: &str, value: &Value)
Source§fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])
fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])
Sets multiple properties of the object at once. Read more
Source§fn set_properties_from_value(&self, property_values: &[(&str, Value)])
fn set_properties_from_value(&self, property_values: &[(&str, Value)])
Sets multiple properties of the object at once. Read more
Source§fn property<V>(&self, property_name: &str) -> Vwhere
V: for<'b> FromValue<'b> + 'static,
fn property<V>(&self, property_name: &str) -> Vwhere
V: for<'b> FromValue<'b> + 'static,
Gets the property
property_name of the object and cast it to the type V. Read moreSource§fn property_value(&self, property_name: &str) -> Value
fn property_value(&self, property_name: &str) -> Value
Gets the property
property_name of the object. Read moreSource§fn has_property(&self, property_name: &str) -> bool
fn has_property(&self, property_name: &str) -> bool
Check if the object has a property
property_name.Source§fn has_property_with_type(&self, property_name: &str, type_: Type) -> bool
fn has_property_with_type(&self, property_name: &str, type_: Type) -> bool
Check if the object has a property
property_name of the given type_.Source§fn property_type(&self, property_name: &str) -> Option<Type>
fn property_type(&self, property_name: &str) -> Option<Type>
Get the type of the property
property_name of this object. Read moreSource§fn find_property(&self, property_name: &str) -> Option<ParamSpec>
fn find_property(&self, property_name: &str) -> Option<ParamSpec>
Get the
ParamSpec of the property property_name of this object.Source§fn list_properties(&self) -> PtrSlice<ParamSpec>
fn list_properties(&self) -> PtrSlice<ParamSpec>
Return all
ParamSpec of the properties of this object.Source§fn freeze_notify(&self) -> PropertyNotificationFreezeGuard
fn freeze_notify(&self) -> PropertyNotificationFreezeGuard
Freeze all property notifications until the return guard object is dropped. Read more
Source§unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where
QD: 'static,
unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where
QD: 'static,
Set arbitrary data on this object with the given
key. Read moreSource§unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where
QD: 'static,
unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where
QD: 'static,
Return previously set arbitrary data of this object with the given
key. Read moreSource§unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where
QD: 'static,
unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where
QD: 'static,
Retrieve previously set arbitrary data of this object with the given
key. Read moreSource§unsafe fn set_data<QD>(&self, key: &str, value: QD)where
QD: 'static,
unsafe fn set_data<QD>(&self, key: &str, value: QD)where
QD: 'static,
Set arbitrary data on this object with the given
key. Read moreSource§unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where
QD: 'static,
unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where
QD: 'static,
Return previously set arbitrary data of this object with the given
key. Read moreSource§unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where
QD: 'static,
unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where
QD: 'static,
Retrieve previously set arbitrary data of this object with the given
key. Read moreSource§fn block_signal(&self, handler_id: &SignalHandlerId)
fn block_signal(&self, handler_id: &SignalHandlerId)
Block a given signal handler. Read more
Source§fn unblock_signal(&self, handler_id: &SignalHandlerId)
fn unblock_signal(&self, handler_id: &SignalHandlerId)
Unblock a given signal handler.
Source§fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)
fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)
Stop emission of the currently emitted signal.
Source§fn stop_signal_emission_by_name(&self, signal_name: &str)
fn stop_signal_emission_by_name(&self, signal_name: &str)
Stop emission of the currently emitted signal by the (possibly detailed) signal name.
Source§fn connect<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moreSource§fn connect_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moreSource§fn connect_local<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moreSource§fn connect_local_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moreSource§unsafe fn connect_unsafe<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moreSource§unsafe fn connect_unsafe_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moreSource§fn connect_closure(
&self,
signal_name: &str,
after: bool,
closure: RustClosure,
) -> SignalHandlerId
fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure, ) -> SignalHandlerId
Connect a closure to the signal
signal_name on this object. Read moreSource§fn connect_closure_id(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
closure: RustClosure,
) -> SignalHandlerId
fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure, ) -> SignalHandlerId
Connect a closure to the signal
signal_id on this object. Read moreSource§fn watch_closure(&self, closure: &impl AsRef<Closure>)
fn watch_closure(&self, closure: &impl AsRef<Closure>)
Limits the lifetime of
closure to the lifetime of the object. When
the object’s reference count drops to zero, the closure will be
invalidated. An invalidated closure will ignore any calls to
invoke_with_values, or
invoke when using Rust closures.Source§fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by signal id. Read more
Source§fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>
fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>
Same as
Self::emit but takes Value for the arguments.Source§fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by its name. Read more
Source§fn emit_by_name_with_values(
&self,
signal_name: &str,
args: &[Value],
) -> Option<Value>
fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value], ) -> Option<Value>
Emit signal by its name. Read more
Source§fn emit_by_name_with_details<R>(
&self,
signal_name: &str,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_by_name_with_details<R>(
&self,
signal_name: &str,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by its name with details. Read more
Source§fn emit_by_name_with_details_and_values(
&self,
signal_name: &str,
details: Quark,
args: &[Value],
) -> Option<Value>
fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value], ) -> Option<Value>
Emit signal by its name with details. Read more
Source§fn emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by signal id with details. Read more
Source§fn emit_with_details_and_values(
&self,
signal_id: SignalId,
details: Quark,
args: &[Value],
) -> Option<Value>
fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value], ) -> Option<Value>
Emit signal by signal id with details. Read more
Source§fn disconnect(&self, handler_id: SignalHandlerId)
fn disconnect(&self, handler_id: SignalHandlerId)
Disconnect a previously connected signal handler.
Source§fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
Connect to the
notify signal of the object. Read moreSource§fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
Connect to the
notify signal of the object. Read moreSource§unsafe fn connect_notify_unsafe<F>(
&self,
name: Option<&str>,
f: F,
) -> SignalHandlerId
unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F, ) -> SignalHandlerId
Connect to the
notify signal of the object. Read moreSource§fn notify(&self, property_name: &str)
fn notify(&self, property_name: &str)
Notify that the given property has changed its value. Read more
Source§fn notify_by_pspec(&self, pspec: &ParamSpec)
fn notify_by_pspec(&self, pspec: &ParamSpec)
Notify that the given property has changed its value. Read more
Source§fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
Add a callback to be notified when the Object is disposed.
Source§fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where
F: FnOnce() + 'static,
fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where
F: FnOnce() + 'static,
Add a callback to be notified when the Object is disposed. Read more
Source§fn bind_property<'a, 'f, 't, O>(
&'a self,
source_property: &'a str,
target: &'a O,
target_property: &'a str,
) -> BindingBuilder<'a, 'f, 't>where
O: ObjectType,
fn bind_property<'a, 'f, 't, O>(
&'a self,
source_property: &'a str,
target: &'a O,
target_property: &'a str,
) -> BindingBuilder<'a, 'f, 't>where
O: ObjectType,
Source§unsafe fn run_dispose(&self)
unsafe fn run_dispose(&self)
Runs the dispose mechanism of the object. Read more
Source§impl<T> PropertyGet for Twhere
T: HasParamSpec,
impl<T> PropertyGet for Twhere
T: HasParamSpec,
Source§impl<O> RTPBaseDepayloadExt for Owhere
O: IsA<RTPBaseDepayload>,
impl<O> RTPBaseDepayloadExt for Owhere
O: IsA<RTPBaseDepayload>,
Source§fn delayed(&self)
fn delayed(&self)
Called from
RTPBaseDepayload or
RTPBaseDepayload when the depayloader needs
to keep the current input RTP header for use with the next output
buffer. Read moreSource§fn dropped(&self)
fn dropped(&self)
Called from
RTPBaseDepayload or
RTPBaseDepayload if the depayloader does not
use the current buffer for the output buffer. This will either drop
the delayed buffer or the last buffer from the header extension
cache. Read moreSource§fn flush(&self, keep_current: bool)
fn flush(&self, keep_current: bool)
If
RTPBaseDepayload or
RTPBaseDepayload drop an output buffer this
function tells the base class to flush header extension cache as
well. Read moreSource§fn is_aggregate_hdrext_enabled(&self) -> bool
fn is_aggregate_hdrext_enabled(&self) -> bool
Queries whether header extensions will be aggregated per depayloaded buffers. Read more
Source§fn is_source_info_enabled(&self) -> bool
fn is_source_info_enabled(&self) -> bool
Queries whether
GstRTPSourceMeta will be added to depayloaded buffers. Read moreSource§fn set_aggregate_hdrext_enabled(&self, enable: bool)
fn set_aggregate_hdrext_enabled(&self, enable: bool)
Enable or disable aggregating header extensions. Read more
Source§fn set_source_info_enabled(&self, enable: bool)
fn set_source_info_enabled(&self, enable: bool)
Enable or disable adding
GstRTPSourceMeta to depayloaded buffers. Read moreSource§fn is_auto_header_extension(&self) -> bool
fn is_auto_header_extension(&self) -> bool
If enabled, the depayloader will automatically try to enable all the
RTP header extensions provided in the sink caps, saving the application
the need to handle these extensions manually using the
GstRTPBaseDepayload::request-extension: signal.
Source§fn set_auto_header_extension(&self, auto_header_extension: bool)
fn set_auto_header_extension(&self, auto_header_extension: bool)
If enabled, the depayloader will automatically try to enable all the
RTP header extensions provided in the sink caps, saving the application
the need to handle these extensions manually using the
GstRTPBaseDepayload::request-extension: signal.
Source§fn max_reorder(&self) -> i32
fn max_reorder(&self) -> i32
Max seqnum reorder before the sender is assumed to have restarted. Read more
Source§fn set_max_reorder(&self, max_reorder: i32)
fn set_max_reorder(&self, max_reorder: i32)
Max seqnum reorder before the sender is assumed to have restarted. Read more
Source§fn is_source_info(&self) -> bool
fn is_source_info(&self) -> bool
Add RTP source information found in RTP header as meta to output buffer.
Source§fn set_source_info(&self, source_info: bool)
fn set_source_info(&self, source_info: bool)
Add RTP source information found in RTP header as meta to output buffer.
Source§fn stats(&self) -> Option<Structure>
fn stats(&self) -> Option<Structure>
Various depayloader statistics retrieved atomically (and are therefore
synchroized with each other). This property return a GstStructure named
application/x-rtp-depayload-stats containing the following fields relating to
the last processed buffer and current state of the stream being depayloaded: Read more
Source§fn connect_add_extension<F: Fn(&Self, &RTPHeaderExtension) + Send + Sync + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_add_extension<F: Fn(&Self, &RTPHeaderExtension) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId
Add
ext as an extension for reading part of an RTP header extension from
incoming RTP packets. Read morefn emit_add_extension(&self, ext: &RTPHeaderExtension)
Source§fn connect_clear_extensions<F: Fn(&Self) + Send + Sync + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_clear_extensions<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId
Clear all RTP header extensions used by this depayloader.
fn emit_clear_extensions(&self)
Source§fn connect_request_extension<F: Fn(&Self, u32, Option<&str>) -> Option<RTPHeaderExtension> + Send + Sync + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_request_extension<F: Fn(&Self, u32, Option<&str>) -> Option<RTPHeaderExtension> + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId
The returned
ext must be configured with the correct ext_id and with the
necessary attributes as required by the extension implementation. Read morefn connect_auto_header_extension_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_max_reorder_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_source_info_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_stats_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId
Source§impl<O> RTPBaseDepayloadExtManual for Owhere
O: IsA<RTPBaseDepayload>,
impl<O> RTPBaseDepayloadExtManual for Owhere
O: IsA<RTPBaseDepayload>,
fn extensions(&self) -> Vec<RTPHeaderExtension>
fn connect_extensions_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F, ) -> SignalHandlerId
fn sink_pad(&self) -> &Pad
fn src_pad(&self) -> &Pad
Source§impl<T> StaticTypeExt for Twhere
T: StaticType,
impl<T> StaticTypeExt for Twhere
T: StaticType,
Source§fn ensure_type()
fn ensure_type()
Ensures that the type has been registered with the type system.
Source§impl<T> ToSendValue for T
impl<T> ToSendValue for T
Source§fn to_send_value(&self) -> SendValue
fn to_send_value(&self) -> SendValue
Returns a
SendValue clone of self.