Interfaces

Previously, in the chapter Adding Properties, we have introduced the concept of GObject properties of controlling an element's behaviour. This is very powerful, but it has two big disadvantages: first of all, it is too generic, and second, it isn't dynamic.

The first disadvantage is related to the customizability of the end-user interface that will be built to control the element. Some properties are more important than others. Some integer properties are better shown in a spin-button widget, whereas others would be better represented by a slider widget. Such things are not possible because the UI has no actual meaning in the application. A UI widget that represents a bitrate property is the same as a UI widget that represents the size of a video, as long as both are of the same GParamSpec type. Another problem is that things like parameter grouping, function grouping, or parameter coupling are not really possible.

The second problem with parameters is that they are not dynamic. In many cases, the allowed values for a property are not fixed, but depend on things that can only be detected at runtime. The names of inputs for a TV card in a video4linux source element, for example, can only be retrieved from the kernel driver when we've opened the device; this only happens when the element goes into the READY state. This means that we cannot create an enum property type to show this to the user.

The solution to those problems is to create very specialized types of controls for certain often-used controls. We use the concept of interfaces to achieve this. The basis of this all is the glib GTypeInterface type. For each case where we think it's useful, we've created interfaces which can be implemented by elements at their own will.

One important note: interfaces do not replace properties. Rather, interfaces should be built next to properties. There are two important reasons for this. First of all, properties can be more easily introspected. Second, properties can be specified on the commandline (gst-launch-1.0).

How to Implement Interfaces

Implementing interfaces is initiated in the _get_type () of your element. You can register one or more interfaces after having registered the type itself. Some interfaces have dependencies on other interfaces or can only be registered by certain types of elements. You will be notified of doing that wrongly when using the element: it will quit with failed assertions, which will explain what went wrong. If it does, you need to register support for that interface before registering support for the interface that you're wanting to support. The example below explains how to add support for a simple interface with no further dependencies.

static void gst_my_filter_some_interface_init   (GstSomeInterface *iface);

GType
gst_my_filter_get_type (void)
{
  static GType my_filter_type = 0;

  if (!my_filter_type) {
    static const GTypeInfo my_filter_info = {
      sizeof (GstMyFilterClass),
      NULL,
      NULL,
      (GClassInitFunc) gst_my_filter_class_init,
      NULL,
      NULL,
      sizeof (GstMyFilter),
      0,
      (GInstanceInitFunc) gst_my_filter_init
    };
    static const GInterfaceInfo some_interface_info = {
      (GInterfaceInitFunc) gst_my_filter_some_interface_init,
      NULL,
      NULL
    };

    my_filter_type =
    g_type_register_static (GST_TYPE_ELEMENT,
                "GstMyFilter",
                &my_filter_info, 0);
    g_type_add_interface_static (my_filter_type,
                 GST_TYPE_SOME_INTERFACE,
                                 &some_interface_info);
  }

  return my_filter_type;
}

static void
gst_my_filter_some_interface_init (GstSomeInterface *iface)
{
  /* here, you would set virtual function pointers in the interface */
}

Or more conveniently:

static void gst_my_filter_some_interface_init   (GstSomeInterface *iface);

G_DEFINE_TYPE_WITH_CODE (GstMyFilter, gst_my_filter,GST_TYPE_ELEMENT,
     G_IMPLEMENT_INTERFACE (GST_TYPE_SOME_INTERFACE,
            gst_my_filter_some_interface_init));

GST_ELEMENT_REGISTER_DEFINE(my_filter, "my-filter", GST_RANK_NONE, GST_TYPE_MY_FILTER);

URI interface

WRITEME

Color Balance Interface

WRITEME

Video Overlay Interface

The GstVideoOverlay interface is used for 2 main purposes:

  • To get a grab on the Window where the video sink element is going to render. This is achieved by either being informed about the Window identifier that the video sink element generated, or by forcing the video sink element to use a specific Window identifier for rendering.

  • To force a redrawing of the latest video frame the video sink element displayed on the Window. Indeed if the GstPipeline is in GST\_STATE\_PAUSED state, moving the Window around will damage its content. Application developers will want to handle the Expose events themselves and force the video sink element to refresh the Window's content.

A plugin drawing video output in a video window will need to have that window at one stage or another. Passive mode simply means that no window has been given to the plugin before that stage, so the plugin created the window by itself. In that case the plugin is responsible of destroying that window when it's not needed any more and it has to tell the applications that a window has been created so that the application can use it. This is done using the have-window-handle message that can be posted from the plugin with the gst_video_overlay_got_window_handle method.

As you probably guessed already active mode just means sending a video window to the plugin so that video output goes there. This is done using the gst_video_overlay_set_window_handle method.

It is possible to switch from one mode to another at any moment, so the plugin implementing this interface has to handle all cases. There are only 2 methods that plugins writers have to implement and they most probably look like that :

static void
gst_my_filter_set_window_handle (GstVideoOverlay *overlay, guintptr handle)
{
  GstMyFilter *my_filter = GST_MY_FILTER (overlay);

  if (my_filter->window)
    gst_my_filter_destroy_window (my_filter->window);

  my_filter->window = handle;
}

static void
gst_my_filter_xoverlay_init (GstVideoOverlayClass *iface)
{
  iface->set_window_handle = gst_my_filter_set_window_handle;
}

You will also need to use the interface methods to post messages when needed such as when receiving a CAPS event where you will know the video geometry and maybe create the window.

static MyFilterWindow *
gst_my_filter_window_create (GstMyFilter *my_filter, gint width, gint height)
{
  MyFilterWindow *window = g_new (MyFilterWindow, 1);
  ...
  gst_video_overlay_got_window_handle (GST_VIDEO_OVERLAY (my_filter), window->win);
}

/* called from the event handler for CAPS events */
static gboolean
gst_my_filter_sink_set_caps (GstMyFilter *my_filter, GstCaps *caps)
{
  gint width, height;
  gboolean ret;
  ...
  ret = gst_structure_get_int (structure, "width", &width);
  ret &= gst_structure_get_int (structure, "height", &height);
  if (!ret) return FALSE;

  gst_video_overlay_prepare_window_handle (GST_VIDEO_OVERLAY (my_filter));

  if (!my_filter->window)
    my_filter->window = gst_my_filter_create_window (my_filter, width, height);

  ...
}

WRITEME

The results of the search are