GstBus

The GstBus is an object responsible for delivering GstMessage packets in a first-in first-out way from the streaming threads (see GstTask) to the application.

Since the application typically only wants to deal with delivery of these messages from one thread, the GstBus will marshall the messages between different threads. This is important since the actual streaming of media is done in another thread than the application.

The GstBus provides support for GSource based notifications. This makes it possible to handle the delivery in the glib GMainLoop.

The GSource callback function gst_bus_async_signal_func can be used to convert all bus messages into signal emissions.

A message is posted on the bus with the gst_bus_post method. With the gst_bus_peek and gst_bus_pop methods one can look at or retrieve a previously posted message.

The bus can be polled with the gst_bus_poll method. This methods blocks up to the specified timeout value until one of the specified messages types is posted on the bus. The application can then gst_bus_pop the messages from the bus to handle them. Alternatively the application can register an asynchronous bus function using gst_bus_add_watch_full or gst_bus_add_watch. This function will install a GSource in the default glib main loop and will deliver messages a short while after they have been posted. Note that the main loop should be running for the asynchronous callbacks.

It is also possible to get messages from the bus without any thread marshalling with the gst_bus_set_sync_handler method. This makes it possible to react to a message in the same thread that posted the message on the bus. This should only be used if the application is able to deal with messages from different threads.

Every GstPipeline has one bus.

Note that a GstPipeline will set its bus into flushing state when changing from READY to NULL state.

GstBus

GObject
    ╰──GInitiallyUnowned
        ╰──GstObject
            ╰──GstBus

The opaque GstBus data structure.

Members

object (GstObject) –

the parent structure


Class structure

GstBusClass

GStreamer bus class.

Fields
parent_class (GstObjectClass) –

the parent class structure


Gst.BusClass

GStreamer bus class.

Attributes
parent_class (Gst.ObjectClass) –

the parent class structure


Gst.BusClass

GStreamer bus class.

Attributes
parent_class (Gst.ObjectClass) –

the parent class structure


Gst.Bus

GObject.Object
    ╰──GObject.InitiallyUnowned
        ╰──Gst.Object
            ╰──Gst.Bus

The opaque Gst.Bus data structure.

Members

object (Gst.Object) –

the parent structure


Gst.Bus

GObject.Object
    ╰──GObject.InitiallyUnowned
        ╰──Gst.Object
            ╰──Gst.Bus

The opaque Gst.Bus data structure.

Members

object (Gst.Object) –

the parent structure


Constructors

gst_bus_new

GstBus *
gst_bus_new ()

Creates a new GstBus instance.

Returns ( [transfer: full])

a new GstBus instance


Gst.Bus.prototype.new

function Gst.Bus.prototype.new(): {
    // javascript wrapper for 'gst_bus_new'
}

Creates a new Gst.Bus instance.

Returns (Gst.Bus)

a new Gst.Bus instance


Gst.Bus.new

def Gst.Bus.new ():
    #python wrapper for 'gst_bus_new'

Creates a new Gst.Bus instance.

Returns (Gst.Bus)

a new Gst.Bus instance


Methods

gst_bus_add_signal_watch

gst_bus_add_signal_watch (GstBus * bus)

Adds a bus signal watch to the default main context with the default priority ( G_PRIORITY_DEFAULT ). It is also possible to use a non-default main context set up using g_main_context_push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

After calling this statement, the bus will emit the "message" signal for each message posted on the bus.

This function may be called multiple times. To clean up, the caller is responsible for calling gst_bus_remove_signal_watch as many times as this function is called.

Parameters:

bus

a GstBus on which you want to receive the "message" signal


Gst.Bus.prototype.add_signal_watch

function Gst.Bus.prototype.add_signal_watch(): {
    // javascript wrapper for 'gst_bus_add_signal_watch'
}

Adds a bus signal watch to the default main context with the default priority ( GLib.PRIORITY_DEFAULT ). It is also possible to use a non-default main context set up using GLib.MainContext.prototype.push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

After calling this statement, the bus will emit the "message" signal for each message posted on the bus.

This function may be called multiple times. To clean up, the caller is responsible for calling Gst.Bus.prototype.remove_signal_watch as many times as this function is called.

Parameters:

bus (Gst.Bus)

a Gst.Bus on which you want to receive the "message" signal


Gst.Bus.add_signal_watch

def Gst.Bus.add_signal_watch (self):
    #python wrapper for 'gst_bus_add_signal_watch'

Adds a bus signal watch to the default main context with the default priority ( GLib.PRIORITY_DEFAULT ). It is also possible to use a non-default main context set up using GLib.MainContext.push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

After calling this statement, the bus will emit the "message" signal for each message posted on the bus.

This function may be called multiple times. To clean up, the caller is responsible for calling Gst.Bus.remove_signal_watch as many times as this function is called.

Parameters:

bus (Gst.Bus)

a Gst.Bus on which you want to receive the "message" signal


gst_bus_add_signal_watch_full

gst_bus_add_signal_watch_full (GstBus * bus,
                               gint priority)

Adds a bus signal watch to the default main context with the given priority (e.g. G_PRIORITY_DEFAULT). It is also possible to use a non-default main context set up using g_main_context_push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

After calling this statement, the bus will emit the "message" signal for each message posted on the bus when the GMainLoop is running.

This function may be called multiple times. To clean up, the caller is responsible for calling gst_bus_remove_signal_watch as many times as this function is called.

There can only be a single bus watch per bus, you must remove any signal watch before you can set another type of watch.

Parameters:

bus

a GstBus on which you want to receive the "message" signal

priority

The priority of the watch.


Gst.Bus.prototype.add_signal_watch_full

function Gst.Bus.prototype.add_signal_watch_full(priority: Number): {
    // javascript wrapper for 'gst_bus_add_signal_watch_full'
}

Adds a bus signal watch to the default main context with the given priority (e.g. GLib.PRIORITY_DEFAULT). It is also possible to use a non-default main context set up using GLib.MainContext.prototype.push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

After calling this statement, the bus will emit the "message" signal for each message posted on the bus when the GLib.MainLoop is running.

This function may be called multiple times. To clean up, the caller is responsible for calling Gst.Bus.prototype.remove_signal_watch as many times as this function is called.

There can only be a single bus watch per bus, you must remove any signal watch before you can set another type of watch.

Parameters:

bus (Gst.Bus)

a Gst.Bus on which you want to receive the "message" signal

priority (Number)

The priority of the watch.


Gst.Bus.add_signal_watch_full

def Gst.Bus.add_signal_watch_full (self, priority):
    #python wrapper for 'gst_bus_add_signal_watch_full'

Adds a bus signal watch to the default main context with the given priority (e.g. GLib.PRIORITY_DEFAULT). It is also possible to use a non-default main context set up using GLib.MainContext.push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

After calling this statement, the bus will emit the "message" signal for each message posted on the bus when the GLib.MainLoop is running.

This function may be called multiple times. To clean up, the caller is responsible for calling Gst.Bus.remove_signal_watch as many times as this function is called.

There can only be a single bus watch per bus, you must remove any signal watch before you can set another type of watch.

Parameters:

bus (Gst.Bus)

a Gst.Bus on which you want to receive the "message" signal

priority (int)

The priority of the watch.


gst_bus_add_watch

guint
gst_bus_add_watch (GstBus * bus,
                   GstBusFunc func,
                   gpointer user_data)

Adds a bus watch to the default main context with the default priority ( G_PRIORITY_DEFAULT ). It is also possible to use a non-default main context set up using g_main_context_push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

This function is used to receive asynchronous messages in the main loop. There can only be a single bus watch per bus, you must remove it before you can set a new one.

The bus watch will only work if a GMainLoop is being run.

The watch can be removed using gst_bus_remove_watch or by returning FALSE from func. If the watch was added to the default main context it is also possible to remove the watch using g_source_remove.

The bus watch will take its own reference to the bus, so it is safe to unref bus using gst_object_unref after setting the bus watch.

Parameters:

bus

a GstBus to create the watch for

func

A function to call when a message is received.

user_data

user data passed to func.

Returns

The event source id or 0 if bus already got an event source.


gst_bus_add_watch_full

guint
gst_bus_add_watch_full (GstBus * bus,
                        gint priority,
                        GstBusFunc func,
                        gpointer user_data,
                        GDestroyNotify notify)

Adds a bus watch to the default main context with the given priority (e.g. G_PRIORITY_DEFAULT). It is also possible to use a non-default main context set up using g_main_context_push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

This function is used to receive asynchronous messages in the main loop. There can only be a single bus watch per bus, you must remove it before you can set a new one.

The bus watch will only work if a GMainLoop is being run.

When func is called, the message belongs to the caller; if you want to keep a copy of it, call gst_message_ref before leaving func.

The watch can be removed using gst_bus_remove_watch or by returning FALSE from func. If the watch was added to the default main context it is also possible to remove the watch using g_source_remove.

The bus watch will take its own reference to the bus, so it is safe to unref bus using gst_object_unref after setting the bus watch.

Parameters:

bus

a GstBus to create the watch for.

priority

The priority of the watch.

func

A function to call when a message is received.

user_data

user data passed to func.

notify

the function to call when the source is removed.

Returns

The event source id or 0 if bus already got an event source.


Gst.Bus.prototype.add_watch_full

function Gst.Bus.prototype.add_watch_full(priority: Number, func: Gst.BusFunc, user_data: Object): {
    // javascript wrapper for 'gst_bus_add_watch_full'
}

Adds a bus watch to the default main context with the given priority (e.g. GLib.PRIORITY_DEFAULT). It is also possible to use a non-default main context set up using GLib.MainContext.prototype.push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

This function is used to receive asynchronous messages in the main loop. There can only be a single bus watch per bus, you must remove it before you can set a new one.

The bus watch will only work if a GLib.MainLoop is being run.

When func is called, the message belongs to the caller; if you want to keep a copy of it, call gst_message_ref (not introspectable) before leaving func.

The watch can be removed using Gst.Bus.prototype.remove_watch or by returning false from func. If the watch was added to the default main context it is also possible to remove the watch using GLib.prototype.source_remove.

The bus watch will take its own reference to the bus, so it is safe to unref bus using Gst.Object.prototype.unref after setting the bus watch.

Parameters:

bus (Gst.Bus)

a Gst.Bus to create the watch for.

priority (Number)

The priority of the watch.

func (Gst.BusFunc)

A function to call when a message is received.

user_data (Object)

user data passed to func.

Returns (Number)

The event source id or 0 if bus already got an event source.


Gst.Bus.add_watch_full

def Gst.Bus.add_watch_full (self, priority, func, *user_data):
    #python wrapper for 'gst_bus_add_watch_full'

Adds a bus watch to the default main context with the given priority (e.g. GLib.PRIORITY_DEFAULT). It is also possible to use a non-default main context set up using GLib.MainContext.push_thread_default (before one had to create a bus watch source and attach it to the desired main context 'manually').

This function is used to receive asynchronous messages in the main loop. There can only be a single bus watch per bus, you must remove it before you can set a new one.

The bus watch will only work if a GLib.MainLoop is being run.

When func is called, the message belongs to the caller; if you want to keep a copy of it, call gst_message_ref (not introspectable) before leaving func.

The watch can be removed using Gst.Bus.remove_watch or by returning False from func. If the watch was added to the default main context it is also possible to remove the watch using GLib.source_remove.

The bus watch will take its own reference to the bus, so it is safe to unref bus using Gst.Object.unref after setting the bus watch.

Parameters:

bus (Gst.Bus)

a Gst.Bus to create the watch for.

priority (int)

The priority of the watch.

func (Gst.BusFunc)

A function to call when a message is received.

user_data (variadic)

user data passed to func.

Returns (int)

The event source id or 0 if bus already got an event source.


gst_bus_async_signal_func

gboolean
gst_bus_async_signal_func (GstBus * bus,
                           GstMessage * message,
                           gpointer data)

A helper GstBusFunc that can be used to convert all asynchronous messages into signals.

Parameters:

bus

a GstBus

message

the GstMessage received

data

user data

Returns

TRUE


Gst.Bus.prototype.async_signal_func

function Gst.Bus.prototype.async_signal_func(message: Gst.Message, data: Object): {
    // javascript wrapper for 'gst_bus_async_signal_func'
}

A helper Gst.BusFunc that can be used to convert all asynchronous messages into signals.

Parameters:

bus (Gst.Bus)

a Gst.Bus

message (Gst.Message)

the Gst.Message received

data (Object)

user data

Returns (Number)

true


Gst.Bus.async_signal_func

def Gst.Bus.async_signal_func (self, message, data):
    #python wrapper for 'gst_bus_async_signal_func'

A helper Gst.BusFunc that can be used to convert all asynchronous messages into signals.

Parameters:

bus (Gst.Bus)

a Gst.Bus

message (Gst.Message)

the Gst.Message received

data (object)

user data

Returns (bool)

True


gst_bus_create_watch

GSource *
gst_bus_create_watch (GstBus * bus)

Create watch for this bus. The GSource will be dispatched whenever a message is on the bus. After the GSource is dispatched, the message is popped off the bus and unreffed.

As with other watches, there can only be one watch on the bus, including any signal watch added with gst_bus_add_signal_watch.

Parameters:

bus

a GstBus to create the watch for

Returns ( [transfer: full][nullable])

a GSource that can be added to a GMainLoop.


Gst.Bus.prototype.create_watch

function Gst.Bus.prototype.create_watch(): {
    // javascript wrapper for 'gst_bus_create_watch'
}

Create watch for this bus. The GLib.Source will be dispatched whenever a message is on the bus. After the GSource is dispatched, the message is popped off the bus and unreffed.

As with other watches, there can only be one watch on the bus, including any signal watch added with Gst.Bus.prototype.add_signal_watch.

Parameters:

bus (Gst.Bus)

a Gst.Bus to create the watch for

Returns (GLib.Source)

a GLib.Source that can be added to a GLib.MainLoop.


Gst.Bus.create_watch

def Gst.Bus.create_watch (self):
    #python wrapper for 'gst_bus_create_watch'

Create watch for this bus. The GLib.Source will be dispatched whenever a message is on the bus. After the GSource is dispatched, the message is popped off the bus and unreffed.

As with other watches, there can only be one watch on the bus, including any signal watch added with Gst.Bus.add_signal_watch.

Parameters:

bus (Gst.Bus)

a Gst.Bus to create the watch for

Returns (GLib.Source)

a GLib.Source that can be added to a GLib.MainLoop.


gst_bus_disable_sync_message_emission

gst_bus_disable_sync_message_emission (GstBus * bus)

Instructs GStreamer to stop emitting the "sync-message" signal for this bus. See gst_bus_enable_sync_message_emission for more information.

In the event that multiple pieces of code have called gst_bus_enable_sync_message_emission, the sync-message emissions will only be stopped after all calls to gst_bus_enable_sync_message_emission were "cancelled" by calling this function. In this way the semantics are exactly the same as gst_object_ref that which calls enable should also call disable.

Parameters:

bus

a GstBus on which you previously called gst_bus_enable_sync_message_emission


Gst.Bus.prototype.disable_sync_message_emission

function Gst.Bus.prototype.disable_sync_message_emission(): {
    // javascript wrapper for 'gst_bus_disable_sync_message_emission'
}

Instructs GStreamer to stop emitting the "sync-message" signal for this bus. See Gst.Bus.prototype.enable_sync_message_emission for more information.

In the event that multiple pieces of code have called Gst.Bus.prototype.enable_sync_message_emission, the sync-message emissions will only be stopped after all calls to Gst.Bus.prototype.enable_sync_message_emission were "cancelled" by calling this function. In this way the semantics are exactly the same as Gst.Object.prototype.ref that which calls enable should also call disable.

Parameters:

bus (Gst.Bus)

a Gst.Bus on which you previously called Gst.Bus.prototype.enable_sync_message_emission


Gst.Bus.disable_sync_message_emission

def Gst.Bus.disable_sync_message_emission (self):
    #python wrapper for 'gst_bus_disable_sync_message_emission'

Instructs GStreamer to stop emitting the "sync-message" signal for this bus. See Gst.Bus.enable_sync_message_emission for more information.

In the event that multiple pieces of code have called Gst.Bus.enable_sync_message_emission, the sync-message emissions will only be stopped after all calls to Gst.Bus.enable_sync_message_emission were "cancelled" by calling this function. In this way the semantics are exactly the same as Gst.Object.ref that which calls enable should also call disable.

Parameters:

bus (Gst.Bus)

a Gst.Bus on which you previously called Gst.Bus.enable_sync_message_emission


gst_bus_enable_sync_message_emission

gst_bus_enable_sync_message_emission (GstBus * bus)

Instructs GStreamer to emit the "sync-message" signal after running the bus's sync handler. This function is here so that code can ensure that they can synchronously receive messages without having to affect what the bin's sync handler is.

This function may be called multiple times. To clean up, the caller is responsible for calling gst_bus_disable_sync_message_emission as many times as this function is called.

While this function looks similar to gst_bus_add_signal_watch, it is not exactly the same -- this function enables *synchronous* emission of signals when messages arrive; gst_bus_add_signal_watch adds an idle callback to pop messages off the bus asynchronously. The sync-message signal comes from the thread of whatever object posted the message; the "message" signal is marshalled to the main thread via the GMainLoop.

Parameters:

bus

a GstBus on which you want to receive the "sync-message" signal


Gst.Bus.prototype.enable_sync_message_emission

function Gst.Bus.prototype.enable_sync_message_emission(): {
    // javascript wrapper for 'gst_bus_enable_sync_message_emission'
}

Instructs GStreamer to emit the "sync-message" signal after running the bus's sync handler. This function is here so that code can ensure that they can synchronously receive messages without having to affect what the bin's sync handler is.

This function may be called multiple times. To clean up, the caller is responsible for calling Gst.Bus.prototype.disable_sync_message_emission as many times as this function is called.

While this function looks similar to Gst.Bus.prototype.add_signal_watch, it is not exactly the same -- this function enables *synchronous* emission of signals when messages arrive; Gst.Bus.prototype.add_signal_watch adds an idle callback to pop messages off the bus asynchronously. The sync-message signal comes from the thread of whatever object posted the message; the "message" signal is marshalled to the main thread via the GLib.MainLoop.

Parameters:

bus (Gst.Bus)

a Gst.Bus on which you want to receive the "sync-message" signal


Gst.Bus.enable_sync_message_emission

def Gst.Bus.enable_sync_message_emission (self):
    #python wrapper for 'gst_bus_enable_sync_message_emission'

Instructs GStreamer to emit the "sync-message" signal after running the bus's sync handler. This function is here so that code can ensure that they can synchronously receive messages without having to affect what the bin's sync handler is.

This function may be called multiple times. To clean up, the caller is responsible for calling Gst.Bus.disable_sync_message_emission as many times as this function is called.

While this function looks similar to Gst.Bus.add_signal_watch, it is not exactly the same -- this function enables *synchronous* emission of signals when messages arrive; Gst.Bus.add_signal_watch adds an idle callback to pop messages off the bus asynchronously. The sync-message signal comes from the thread of whatever object posted the message; the "message" signal is marshalled to the main thread via the GLib.MainLoop.

Parameters:

bus (Gst.Bus)

a Gst.Bus on which you want to receive the "sync-message" signal


gst_bus_get_pollfd

gst_bus_get_pollfd (GstBus * bus,
                    GPollFD * fd)

Gets the file descriptor from the bus which can be used to get notified about messages being available with functions like g_poll, and allows integration into other event loops based on file descriptors. Whenever a message is available, the POLLIN / G_IO_IN event is set.

Warning: NEVER read or write anything to the returned fd but only use it for getting notifications via g_poll or similar and then use the normal GstBus API, e.g. gst_bus_pop.

Parameters:

bus

A GstBus

fd ( [out])

A GPollFD to fill

Since : 1.14


Gst.Bus.prototype.get_pollfd

function Gst.Bus.prototype.get_pollfd(): {
    // javascript wrapper for 'gst_bus_get_pollfd'
}

Gets the file descriptor from the bus which can be used to get notified about messages being available with functions like GLib.prototype.poll, and allows integration into other event loops based on file descriptors. Whenever a message is available, the POLLIN / GLib.IOCondition.IN event is set.

Warning: NEVER read or write anything to the returned fd but only use it for getting notifications via GLib.prototype.poll or similar and then use the normal GstBus API, e.g. Gst.Bus.prototype.pop.

Parameters:

bus (Gst.Bus)

A Gst.Bus

Since : 1.14


Gst.Bus.get_pollfd

def Gst.Bus.get_pollfd (self):
    #python wrapper for 'gst_bus_get_pollfd'

Gets the file descriptor from the bus which can be used to get notified about messages being available with functions like GLib.poll, and allows integration into other event loops based on file descriptors. Whenever a message is available, the POLLIN / GLib.IOCondition.IN event is set.

Warning: NEVER read or write anything to the returned fd but only use it for getting notifications via GLib.poll or similar and then use the normal GstBus API, e.g. Gst.Bus.pop.

Parameters:

bus (Gst.Bus)

A Gst.Bus

Since : 1.14


gst_bus_have_pending

gboolean
gst_bus_have_pending (GstBus * bus)

Checks if there are pending messages on the bus that should be handled.

Parameters:

bus

a GstBus to check

Returns

TRUE if there are messages on the bus to be handled, FALSE otherwise.


Gst.Bus.prototype.have_pending

function Gst.Bus.prototype.have_pending(): {
    // javascript wrapper for 'gst_bus_have_pending'
}

Checks if there are pending messages on the bus that should be handled.

Parameters:

bus (Gst.Bus)

a Gst.Bus to check

Returns (Number)

true if there are messages on the bus to be handled, false otherwise.


Gst.Bus.have_pending

def Gst.Bus.have_pending (self):
    #python wrapper for 'gst_bus_have_pending'

Checks if there are pending messages on the bus that should be handled.

Parameters:

bus (Gst.Bus)

a Gst.Bus to check

Returns (bool)

True if there are messages on the bus to be handled, False otherwise.


gst_bus_peek

GstMessage *
gst_bus_peek (GstBus * bus)

Peeks the message on the top of the bus' queue. The message will remain on the bus' message queue.

Parameters:

bus

a GstBus

Returns ( [transfer: full][nullable])

the GstMessage that is on the bus, or NULL if the bus is empty.


Gst.Bus.prototype.peek

function Gst.Bus.prototype.peek(): {
    // javascript wrapper for 'gst_bus_peek'
}

Peeks the message on the top of the bus' queue. The message will remain on the bus' message queue.

Parameters:

bus (Gst.Bus)

a Gst.Bus

Returns (Gst.Message)

the Gst.Message that is on the bus, or null if the bus is empty.


Gst.Bus.peek

def Gst.Bus.peek (self):
    #python wrapper for 'gst_bus_peek'

Peeks the message on the top of the bus' queue. The message will remain on the bus' message queue.

Parameters:

bus (Gst.Bus)

a Gst.Bus

Returns (Gst.Message)

the Gst.Message that is on the bus, or None if the bus is empty.


gst_bus_poll

GstMessage *
gst_bus_poll (GstBus * bus,
              GstMessageType events,
              GstClockTime timeout)

Polls the bus for messages. Will block while waiting for messages to come. You can specify a maximum time to poll with the timeout parameter. If timeout is negative, this function will block indefinitely.

All messages not in events will be popped off the bus and will be ignored. It is not possible to use message enums beyond GST_MESSAGE_EXTENDED in the events mask

Because poll is implemented using the "message" signal enabled by gst_bus_add_signal_watch, calling gst_bus_poll will cause the "message" signal to be emitted for every message that poll sees. Thus a "message" signal handler will see the same messages that this function sees -- neither will steal messages from the other.

This function will run a GMainLoop from the default main context when polling.

You should never use this function, since it is pure evil. This is especially true for GUI applications based on Gtk+ or Qt, but also for any other non-trivial application that uses the GLib main loop. As this function runs a GLib main loop, any callback attached to the default GLib main context may be invoked. This could be timeouts, GUI events, I/O events etc.; even if gst_bus_poll is called with a 0 timeout. Any of these callbacks may do things you do not expect, e.g. destroy the main application window or some other resource; change other application state; display a dialog and run another main loop until the user clicks it away. In short, using this function may add a lot of complexity to your code through unexpected re-entrancy and unexpected changes to your application's state.

For 0 timeouts use gst_bus_pop_filtered instead of this function; for other short timeouts use gst_bus_timed_pop_filtered; everything else is better handled by setting up an asynchronous bus watch and doing things from there.

Parameters:

bus

a GstBus

events

a mask of GstMessageType, representing the set of message types to poll for (note special handling of extended message types below)

timeout

the poll timeout, as a GstClockTime, or GST_CLOCK_TIME_NONE to poll indefinitely.

Returns ( [transfer: full][nullable])

the message that was received, or NULL if the poll timed out.


Gst.Bus.prototype.poll

function Gst.Bus.prototype.poll(events: Gst.MessageType, timeout: Number): {
    // javascript wrapper for 'gst_bus_poll'
}

Polls the bus for messages. Will block while waiting for messages to come. You can specify a maximum time to poll with the timeout parameter. If timeout is negative, this function will block indefinitely.

All messages not in events will be popped off the bus and will be ignored. It is not possible to use message enums beyond Gst.MessageType.EXTENDED in the events mask

Because poll is implemented using the "message" signal enabled by Gst.Bus.prototype.add_signal_watch, calling Gst.Bus.prototype.poll will cause the "message" signal to be emitted for every message that poll sees. Thus a "message" signal handler will see the same messages that this function sees -- neither will steal messages from the other.

This function will run a GLib.MainLoop from the default main context when polling.

You should never use this function, since it is pure evil. This is especially true for GUI applications based on Gtk+ or Qt, but also for any other non-trivial application that uses the GLib main loop. As this function runs a GLib main loop, any callback attached to the default GLib main context may be invoked. This could be timeouts, GUI events, I/O events etc.; even if Gst.Bus.prototype.poll is called with a 0 timeout. Any of these callbacks may do things you do not expect, e.g. destroy the main application window or some other resource; change other application state; display a dialog and run another main loop until the user clicks it away. In short, using this function may add a lot of complexity to your code through unexpected re-entrancy and unexpected changes to your application's state.

For 0 timeouts use Gst.Bus.prototype.pop_filtered instead of this function; for other short timeouts use Gst.Bus.prototype.timed_pop_filtered; everything else is better handled by setting up an asynchronous bus watch and doing things from there.

Parameters:

bus (Gst.Bus)

a Gst.Bus

events (Gst.MessageType)

a mask of Gst.MessageType, representing the set of message types to poll for (note special handling of extended message types below)

timeout (Number)

the poll timeout, as a Number, or Gst.CLOCK_TIME_NONE to poll indefinitely.

Returns (Gst.Message)

the message that was received, or null if the poll timed out.


Gst.Bus.poll

def Gst.Bus.poll (self, events, timeout):
    #python wrapper for 'gst_bus_poll'

Polls the bus for messages. Will block while waiting for messages to come. You can specify a maximum time to poll with the timeout parameter. If timeout is negative, this function will block indefinitely.

All messages not in events will be popped off the bus and will be ignored. It is not possible to use message enums beyond Gst.MessageType.EXTENDED in the events mask

Because poll is implemented using the "message" signal enabled by Gst.Bus.add_signal_watch, calling Gst.Bus.poll will cause the "message" signal to be emitted for every message that poll sees. Thus a "message" signal handler will see the same messages that this function sees -- neither will steal messages from the other.

This function will run a GLib.MainLoop from the default main context when polling.

You should never use this function, since it is pure evil. This is especially true for GUI applications based on Gtk+ or Qt, but also for any other non-trivial application that uses the GLib main loop. As this function runs a GLib main loop, any callback attached to the default GLib main context may be invoked. This could be timeouts, GUI events, I/O events etc.; even if Gst.Bus.poll is called with a 0 timeout. Any of these callbacks may do things you do not expect, e.g. destroy the main application window or some other resource; change other application state; display a dialog and run another main loop until the user clicks it away. In short, using this function may add a lot of complexity to your code through unexpected re-entrancy and unexpected changes to your application's state.

For 0 timeouts use Gst.Bus.pop_filtered instead of this function; for other short timeouts use Gst.Bus.timed_pop_filtered; everything else is better handled by setting up an asynchronous bus watch and doing things from there.

Parameters:

bus (Gst.Bus)

a Gst.Bus

events (Gst.MessageType)

a mask of Gst.MessageType, representing the set of message types to poll for (note special handling of extended message types below)

timeout (int)

the poll timeout, as a int, or Gst.CLOCK_TIME_NONE to poll indefinitely.

Returns (Gst.Message)

the message that was received, or None if the poll timed out.


gst_bus_pop

GstMessage *
gst_bus_pop (GstBus * bus)

Gets a message from the bus.

Parameters:

bus

a GstBus to pop

Returns ( [transfer: full][nullable])

the GstMessage that is on the bus, or NULL if the bus is empty.


Gst.Bus.prototype.pop

function Gst.Bus.prototype.pop(): {
    // javascript wrapper for 'gst_bus_pop'
}

Gets a message from the bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to pop

Returns (Gst.Message)

the Gst.Message that is on the bus, or null if the bus is empty.


Gst.Bus.pop

def Gst.Bus.pop (self):
    #python wrapper for 'gst_bus_pop'

Gets a message from the bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to pop

Returns (Gst.Message)

the Gst.Message that is on the bus, or None if the bus is empty.


gst_bus_pop_filtered

GstMessage *
gst_bus_pop_filtered (GstBus * bus,
                      GstMessageType types)

Gets a message matching type from the bus. Will discard all messages on the bus that do not match type and that have been posted before the first message that does match type. If there is no message matching type on the bus, all messages will be discarded. It is not possible to use message enums beyond GST_MESSAGE_EXTENDED in the events mask.

Parameters:

bus

a GstBus to pop

types

message types to take into account

Returns ( [transfer: full][nullable])

the next GstMessage matching type that is on the bus, or NULL if the bus is empty or there is no message matching type.


Gst.Bus.prototype.pop_filtered

function Gst.Bus.prototype.pop_filtered(types: Gst.MessageType): {
    // javascript wrapper for 'gst_bus_pop_filtered'
}

Gets a message matching type from the bus. Will discard all messages on the bus that do not match type and that have been posted before the first message that does match type. If there is no message matching type on the bus, all messages will be discarded. It is not possible to use message enums beyond Gst.MessageType.EXTENDED in the events mask.

Parameters:

bus (Gst.Bus)

a Gst.Bus to pop

types (Gst.MessageType)

message types to take into account

Returns (Gst.Message)

the next Gst.Message matching type that is on the bus, or null if the bus is empty or there is no message matching type.


Gst.Bus.pop_filtered

def Gst.Bus.pop_filtered (self, types):
    #python wrapper for 'gst_bus_pop_filtered'

Gets a message matching type from the bus. Will discard all messages on the bus that do not match type and that have been posted before the first message that does match type. If there is no message matching type on the bus, all messages will be discarded. It is not possible to use message enums beyond Gst.MessageType.EXTENDED in the events mask.

Parameters:

bus (Gst.Bus)

a Gst.Bus to pop

types (Gst.MessageType)

message types to take into account

Returns (Gst.Message)

the next Gst.Message matching type that is on the bus, or None if the bus is empty or there is no message matching type.


gst_bus_post

gboolean
gst_bus_post (GstBus * bus,
              GstMessage * message)

Posts a message on the given bus. Ownership of the message is taken by the bus.

Parameters:

bus

a GstBus to post on

message ( [transfer: full])

the GstMessage to post

Returns

TRUE if the message could be posted, FALSE if the bus is flushing.


Gst.Bus.prototype.post

function Gst.Bus.prototype.post(message: Gst.Message): {
    // javascript wrapper for 'gst_bus_post'
}

Posts a message on the given bus. Ownership of the message is taken by the bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to post on

message (Gst.Message)

the Gst.Message to post

Returns (Number)

true if the message could be posted, false if the bus is flushing.


Gst.Bus.post

def Gst.Bus.post (self, message):
    #python wrapper for 'gst_bus_post'

Posts a message on the given bus. Ownership of the message is taken by the bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to post on

message (Gst.Message)

the Gst.Message to post

Returns (bool)

True if the message could be posted, False if the bus is flushing.


gst_bus_remove_signal_watch

gst_bus_remove_signal_watch (GstBus * bus)

Removes a signal watch previously added with gst_bus_add_signal_watch.

Parameters:

bus

a GstBus you previously added a signal watch to


Gst.Bus.prototype.remove_signal_watch

function Gst.Bus.prototype.remove_signal_watch(): {
    // javascript wrapper for 'gst_bus_remove_signal_watch'
}

Removes a signal watch previously added with Gst.Bus.prototype.add_signal_watch.

Parameters:

bus (Gst.Bus)

a Gst.Bus you previously added a signal watch to


Gst.Bus.remove_signal_watch

def Gst.Bus.remove_signal_watch (self):
    #python wrapper for 'gst_bus_remove_signal_watch'

Removes a signal watch previously added with Gst.Bus.add_signal_watch.

Parameters:

bus (Gst.Bus)

a Gst.Bus you previously added a signal watch to


gst_bus_remove_watch

gboolean
gst_bus_remove_watch (GstBus * bus)

Removes an installed bus watch from bus.

Parameters:

bus

a GstBus to remove the watch from.

Returns

TRUE on success or FALSE if bus has no event source.

Since : 1.6


Gst.Bus.prototype.remove_watch

function Gst.Bus.prototype.remove_watch(): {
    // javascript wrapper for 'gst_bus_remove_watch'
}

Removes an installed bus watch from bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to remove the watch from.

Returns (Number)

true on success or false if bus has no event source.

Since : 1.6


Gst.Bus.remove_watch

def Gst.Bus.remove_watch (self):
    #python wrapper for 'gst_bus_remove_watch'

Removes an installed bus watch from bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to remove the watch from.

Returns (bool)

True on success or False if bus has no event source.

Since : 1.6


gst_bus_set_flushing

gst_bus_set_flushing (GstBus * bus,
                      gboolean flushing)

If flushing, flushes out and unrefs any messages queued in the bus. Releases references to the message origin objects. Will flush future messages until gst_bus_set_flushing sets flushing to FALSE.

Parameters:

bus

a GstBus

flushing

whether or not to flush the bus


Gst.Bus.prototype.set_flushing

function Gst.Bus.prototype.set_flushing(flushing: Number): {
    // javascript wrapper for 'gst_bus_set_flushing'
}

If flushing, flushes out and unrefs any messages queued in the bus. Releases references to the message origin objects. Will flush future messages until Gst.Bus.prototype.set_flushing sets flushing to false.

Parameters:

bus (Gst.Bus)

a Gst.Bus

flushing (Number)

whether or not to flush the bus


Gst.Bus.set_flushing

def Gst.Bus.set_flushing (self, flushing):
    #python wrapper for 'gst_bus_set_flushing'

If flushing, flushes out and unrefs any messages queued in the bus. Releases references to the message origin objects. Will flush future messages until Gst.Bus.set_flushing sets flushing to False.

Parameters:

bus (Gst.Bus)

a Gst.Bus

flushing (bool)

whether or not to flush the bus


gst_bus_set_sync_handler

gst_bus_set_sync_handler (GstBus * bus,
                          GstBusSyncHandler func,
                          gpointer user_data,
                          GDestroyNotify notify)

Sets the synchronous handler on the bus. The function will be called every time a new message is posted on the bus. Note that the function will be called in the same thread context as the posting object. This function is usually only called by the creator of the bus. Applications should handle messages asynchronously using the gst_bus watch and poll functions.

Before 1.16.3 it was not possible to replace an existing handler and clearing an existing handler with NULL was not thread-safe.

Parameters:

bus

a GstBus to install the handler on

func ( [allow-none])

The handler function to install

user_data

User data that will be sent to the handler function.

notify

called when user_data becomes unused


Gst.Bus.prototype.set_sync_handler

function Gst.Bus.prototype.set_sync_handler(func: Gst.BusSyncHandler, user_data: Object): {
    // javascript wrapper for 'gst_bus_set_sync_handler'
}

Sets the synchronous handler on the bus. The function will be called every time a new message is posted on the bus. Note that the function will be called in the same thread context as the posting object. This function is usually only called by the creator of the bus. Applications should handle messages asynchronously using the gst_bus watch and poll functions.

Before 1.16.3 it was not possible to replace an existing handler and clearing an existing handler with null was not thread-safe.

Parameters:

bus (Gst.Bus)

a Gst.Bus to install the handler on

func (Gst.BusSyncHandler)

The handler function to install

user_data (Object)

User data that will be sent to the handler function.


Gst.Bus.set_sync_handler

def Gst.Bus.set_sync_handler (self, func, *user_data):
    #python wrapper for 'gst_bus_set_sync_handler'

Sets the synchronous handler on the bus. The function will be called every time a new message is posted on the bus. Note that the function will be called in the same thread context as the posting object. This function is usually only called by the creator of the bus. Applications should handle messages asynchronously using the gst_bus watch and poll functions.

Before 1.16.3 it was not possible to replace an existing handler and clearing an existing handler with None was not thread-safe.

Parameters:

bus (Gst.Bus)

a Gst.Bus to install the handler on

func (Gst.BusSyncHandler)

The handler function to install

user_data (variadic)

User data that will be sent to the handler function.


gst_bus_sync_signal_handler

GstBusSyncReply
gst_bus_sync_signal_handler (GstBus * bus,
                             GstMessage * message,
                             gpointer data)

A helper GstBusSyncHandler that can be used to convert all synchronous messages into signals.

Parameters:

bus

a GstBus

message

the GstMessage received

data

user data

Returns

GST_BUS_PASS


Gst.Bus.prototype.sync_signal_handler

function Gst.Bus.prototype.sync_signal_handler(message: Gst.Message, data: Object): {
    // javascript wrapper for 'gst_bus_sync_signal_handler'
}

A helper Gst.BusSyncHandler that can be used to convert all synchronous messages into signals.

Parameters:

bus (Gst.Bus)

a Gst.Bus

message (Gst.Message)

the Gst.Message received

data (Object)

user data


Gst.Bus.sync_signal_handler

def Gst.Bus.sync_signal_handler (self, message, data):
    #python wrapper for 'gst_bus_sync_signal_handler'

A helper Gst.BusSyncHandler that can be used to convert all synchronous messages into signals.

Parameters:

bus (Gst.Bus)

a Gst.Bus

message (Gst.Message)

the Gst.Message received

data (object)

user data


gst_bus_timed_pop

GstMessage *
gst_bus_timed_pop (GstBus * bus,
                   GstClockTime timeout)

Gets a message from the bus, waiting up to the specified timeout.

If timeout is 0, this function behaves like gst_bus_pop. If timeout is GST_CLOCK_TIME_NONE, this function will block forever until a message was posted on the bus.

Parameters:

bus

a GstBus to pop

timeout

a timeout

Returns ( [transfer: full][nullable])

the GstMessage that is on the bus after the specified timeout or NULL if the bus is empty after the timeout expired.


Gst.Bus.prototype.timed_pop

function Gst.Bus.prototype.timed_pop(timeout: Number): {
    // javascript wrapper for 'gst_bus_timed_pop'
}

Gets a message from the bus, waiting up to the specified timeout.

If timeout is 0, this function behaves like Gst.Bus.prototype.pop. If timeout is Gst.CLOCK_TIME_NONE, this function will block forever until a message was posted on the bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to pop

timeout (Number)

a timeout

Returns (Gst.Message)

the Gst.Message that is on the bus after the specified timeout or null if the bus is empty after the timeout expired.


Gst.Bus.timed_pop

def Gst.Bus.timed_pop (self, timeout):
    #python wrapper for 'gst_bus_timed_pop'

Gets a message from the bus, waiting up to the specified timeout.

If timeout is 0, this function behaves like Gst.Bus.pop. If timeout is Gst.CLOCK_TIME_NONE, this function will block forever until a message was posted on the bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to pop

timeout (int)

a timeout

Returns (Gst.Message)

the Gst.Message that is on the bus after the specified timeout or None if the bus is empty after the timeout expired.


gst_bus_timed_pop_filtered

GstMessage *
gst_bus_timed_pop_filtered (GstBus * bus,
                            GstClockTime timeout,
                            GstMessageType types)

Gets a message from the bus whose type matches the message type mask types, waiting up to the specified timeout (and discarding any messages that do not match the mask provided).

If timeout is 0, this function behaves like gst_bus_pop_filtered. If timeout is GST_CLOCK_TIME_NONE, this function will block forever until a matching message was posted on the bus.

Parameters:

bus

a GstBus to pop from

timeout

a timeout in nanoseconds, or GST_CLOCK_TIME_NONE to wait forever

types

message types to take into account, GST_MESSAGE_ANY for any type

Returns ( [transfer: full][nullable])

a GstMessage matching the filter in types, or NULL if no matching message was found on the bus until the timeout expired.


Gst.Bus.prototype.timed_pop_filtered

function Gst.Bus.prototype.timed_pop_filtered(timeout: Number, types: Gst.MessageType): {
    // javascript wrapper for 'gst_bus_timed_pop_filtered'
}

Gets a message from the bus whose type matches the message type mask types, waiting up to the specified timeout (and discarding any messages that do not match the mask provided).

If timeout is 0, this function behaves like Gst.Bus.prototype.pop_filtered. If timeout is Gst.CLOCK_TIME_NONE, this function will block forever until a matching message was posted on the bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to pop from

timeout (Number)

a timeout in nanoseconds, or Gst.CLOCK_TIME_NONE to wait forever

types (Gst.MessageType)

message types to take into account, Gst.MessageType.ANY for any type

Returns (Gst.Message)

a Gst.Message matching the filter in types, or null if no matching message was found on the bus until the timeout expired.


Gst.Bus.timed_pop_filtered

def Gst.Bus.timed_pop_filtered (self, timeout, types):
    #python wrapper for 'gst_bus_timed_pop_filtered'

Gets a message from the bus whose type matches the message type mask types, waiting up to the specified timeout (and discarding any messages that do not match the mask provided).

If timeout is 0, this function behaves like Gst.Bus.pop_filtered. If timeout is Gst.CLOCK_TIME_NONE, this function will block forever until a matching message was posted on the bus.

Parameters:

bus (Gst.Bus)

a Gst.Bus to pop from

timeout (int)

a timeout in nanoseconds, or Gst.CLOCK_TIME_NONE to wait forever

types (Gst.MessageType)

message types to take into account, Gst.MessageType.ANY for any type

Returns (Gst.Message)

a Gst.Message matching the filter in types, or None if no matching message was found on the bus until the timeout expired.


Signals

message

message_callback (GstBus * self,
                  GstMessage * message,
                  gpointer user_data)

A message has been posted on the bus. This signal is emitted from a GSource added to the mainloop. this signal will only be emitted when there is a GMainLoop running.

Parameters:

self

the object which received the signal

message

the message that has been posted asynchronously

user_data
No description available

Flags: Run Last


message

function message_callback(self: Gst.Bus, message: Gst.Message, user_data: Object): {
    // javascript callback for the 'message' signal
}

A message has been posted on the bus. This signal is emitted from a GLib.Source added to the mainloop. this signal will only be emitted when there is a GLib.MainLoop running.

Parameters:

self (Gst.Bus)

the object which received the signal

message (Gst.Message)

the message that has been posted asynchronously

user_data (Object)
No description available

Flags: Run Last


message

def message_callback (self, message, *user_data):
    #python callback for the 'message' signal

A message has been posted on the bus. This signal is emitted from a GLib.Source added to the mainloop. this signal will only be emitted when there is a GLib.MainLoop running.

Parameters:

self (Gst.Bus)

the object which received the signal

message (Gst.Message)

the message that has been posted asynchronously

user_data (variadic)
No description available

Flags: Run Last


sync-message

sync_message_callback (GstBus * self,
                       GstMessage * message,
                       gpointer user_data)

A message has been posted on the bus. This signal is emitted from the thread that posted the message so one has to be careful with locking.

This signal will not be emitted by default, you have to call gst_bus_enable_sync_message_emission before.

Parameters:

self

the object which received the signal

message

the message that has been posted synchronously

user_data
No description available

Flags: Run Last


sync-message

function sync_message_callback(self: Gst.Bus, message: Gst.Message, user_data: Object): {
    // javascript callback for the 'sync-message' signal
}

A message has been posted on the bus. This signal is emitted from the thread that posted the message so one has to be careful with locking.

This signal will not be emitted by default, you have to call Gst.Bus.prototype.enable_sync_message_emission before.

Parameters:

self (Gst.Bus)

the object which received the signal

message (Gst.Message)

the message that has been posted synchronously

user_data (Object)
No description available

Flags: Run Last


sync-message

def sync_message_callback (self, message, *user_data):
    #python callback for the 'sync-message' signal

A message has been posted on the bus. This signal is emitted from the thread that posted the message so one has to be careful with locking.

This signal will not be emitted by default, you have to call Gst.Bus.enable_sync_message_emission before.

Parameters:

self (Gst.Bus)

the object which received the signal

message (Gst.Message)

the message that has been posted synchronously

user_data (variadic)
No description available

Flags: Run Last


Properties

enable-async

“enable-async” gboolean

Enables async message delivery support for bus watches, gst_bus_pop and similar API. Without this only the synchronous message handlers are called.

This property is used to create the child element buses in GstBin.

Flags : Read / Write / Construct Only


enable-async

“enable-async” Number

Enables async message delivery support for bus watches, Gst.Bus.prototype.pop and similar API. Without this only the synchronous message handlers are called.

This property is used to create the child element buses in Gst.Bin.

Flags : Read / Write / Construct Only


enable_async

“self.props.enable_async” bool

Enables async message delivery support for bus watches, Gst.Bus.pop and similar API. Without this only the synchronous message handlers are called.

This property is used to create the child element buses in Gst.Bin.

Flags : Read / Write / Construct Only


Virtual Methods

message

message (GstBus * bus,
         GstMessage * message)

A message has been posted on the bus.

Parameters:

bus

the GstBus

message

the message that has been posted asynchronously


vfunc_message

function vfunc_message(bus: Gst.Bus, message: Gst.Message): {
    // javascript implementation of the 'message' virtual method
}

A message has been posted on the bus.

Parameters:

bus (Gst.Bus)

the Gst.Bus

message (Gst.Message)

the message that has been posted asynchronously


do_message

def do_message (bus, message):
    #python implementation of the 'message' virtual method

A message has been posted on the bus.

Parameters:

bus (Gst.Bus)

the Gst.Bus

message (Gst.Message)

the message that has been posted asynchronously


sync_message

sync_message (GstBus * bus,
              GstMessage * message)

A message has been posted on the bus.

Parameters:

bus

the GstBus

message

the message that has been posted synchronously


vfunc_sync_message

function vfunc_sync_message(bus: Gst.Bus, message: Gst.Message): {
    // javascript implementation of the 'sync_message' virtual method
}

A message has been posted on the bus.

Parameters:

bus (Gst.Bus)

the Gst.Bus

message (Gst.Message)

the message that has been posted synchronously


do_sync_message

def do_sync_message (bus, message):
    #python implementation of the 'sync_message' virtual method

A message has been posted on the bus.

Parameters:

bus (Gst.Bus)

the Gst.Bus

message (Gst.Message)

the message that has been posted synchronously


Function Macros

GST_BUS_CAST

#define GST_BUS_CAST(bus)         ((GstBus*)(bus))

Enumerations

GstBusFlags

The standard flags that a bus may have.

Members
GST_BUS_FLUSHING (16) –

The bus is currently dropping all messages

GST_BUS_FLAG_LAST (32) –

offset to define more flags


Gst.BusFlags

The standard flags that a bus may have.

Members
Gst.BusFlags.FLUSHING (16) –

The bus is currently dropping all messages

Gst.BusFlags.FLAG_LAST (32) –

offset to define more flags


Gst.BusFlags

The standard flags that a bus may have.

Members
Gst.BusFlags.FLUSHING (16) –

The bus is currently dropping all messages

Gst.BusFlags.FLAG_LAST (32) –

offset to define more flags


GstBusSyncReply

The result values for a GstBusSyncHandler.

Members
GST_BUS_DROP (0) –

drop the message

GST_BUS_PASS (1) –

pass the message to the async queue

GST_BUS_ASYNC (2) –

pass message to async queue, continue if message is handled


Gst.BusSyncReply

The result values for a GstBusSyncHandler.

Members
Gst.BusSyncReply.DROP (0) –

drop the message

Gst.BusSyncReply.PASS (1) –

pass the message to the async queue

Gst.BusSyncReply.ASYNC (2) –

pass message to async queue, continue if message is handled


Gst.BusSyncReply

The result values for a GstBusSyncHandler.

Members
Gst.BusSyncReply.DROP (0) –

drop the message

Gst.BusSyncReply.PASS (1) –

pass the message to the async queue

Gst.BusSyncReply.ASYNC (2) –

pass message to async queue, continue if message is handled


Callbacks

GstBusFunc

gboolean
(*GstBusFunc) (GstBus * bus,
               GstMessage * message,
               gpointer user_data)

Specifies the type of function passed to gst_bus_add_watch or gst_bus_add_watch_full, which is called from the mainloop when a message is available on the bus.

The message passed to the function will be unreffed after execution of this function so it should not be freed in the function.

Note that this function is used as a GSourceFunc which means that returning FALSE will remove the GSource from the mainloop.

Parameters:

bus

the GstBus that sent the message

message

the GstMessage

user_data

user data that has been given, when registering the handler

Returns

FALSE if the event source should be removed.


Gst.BusFunc

function Gst.BusFunc(bus: Gst.Bus, message: Gst.Message, user_data: Object): {
    // javascript wrapper for 'GstBusFunc'
}

Specifies the type of function passed to gst_bus_add_watch (not introspectable) or Gst.Bus.prototype.add_watch_full, which is called from the mainloop when a message is available on the bus.

The message passed to the function will be unreffed after execution of this function so it should not be freed in the function.

Note that this function is used as a GLib.SourceFunc which means that returning false will remove the GLib.Source from the mainloop.

Parameters:

bus (Gst.Bus)

the Gst.Bus that sent the message

message (Gst.Message)

the Gst.Message

user_data (Object)

user data that has been given, when registering the handler

Returns (Number)

false if the event source should be removed.


Gst.BusFunc

def Gst.BusFunc (bus, message, *user_data):
    #python wrapper for 'GstBusFunc'

Specifies the type of function passed to gst_bus_add_watch (not introspectable) or Gst.Bus.add_watch_full, which is called from the mainloop when a message is available on the bus.

The message passed to the function will be unreffed after execution of this function so it should not be freed in the function.

Note that this function is used as a GLib.SourceFunc which means that returning False will remove the GLib.Source from the mainloop.

Parameters:

bus (Gst.Bus)

the Gst.Bus that sent the message

message (Gst.Message)

the Gst.Message

user_data (variadic)

user data that has been given, when registering the handler

Returns (bool)

False if the event source should be removed.


GstBusSyncHandler

GstBusSyncReply
(*GstBusSyncHandler) (GstBus * bus,
                      GstMessage * message,
                      gpointer user_data)

Handler will be invoked synchronously, when a new message has been injected into the bus. This function is mostly used internally. Only one sync handler can be attached to a given bus.

If the handler returns GST_BUS_DROP, it should unref the message, else the message should not be unreffed by the sync handler.

Parameters:

bus

the GstBus that sent the message

message

the GstMessage

user_data

user data that has been given, when registering the handler

Returns

GstBusSyncReply stating what to do with the message


Gst.BusSyncHandler

function Gst.BusSyncHandler(bus: Gst.Bus, message: Gst.Message, user_data: Object): {
    // javascript wrapper for 'GstBusSyncHandler'
}

Handler will be invoked synchronously, when a new message has been injected into the bus. This function is mostly used internally. Only one sync handler can be attached to a given bus.

If the handler returns Gst.BusSyncReply.DROP, it should unref the message, else the message should not be unreffed by the sync handler.

Parameters:

bus (Gst.Bus)

the Gst.Bus that sent the message

message (Gst.Message)

the Gst.Message

user_data (Object)

user data that has been given, when registering the handler

Returns (Gst.BusSyncReply)

Gst.BusSyncReply stating what to do with the message


Gst.BusSyncHandler

def Gst.BusSyncHandler (bus, message, *user_data):
    #python wrapper for 'GstBusSyncHandler'

Handler will be invoked synchronously, when a new message has been injected into the bus. This function is mostly used internally. Only one sync handler can be attached to a given bus.

If the handler returns Gst.BusSyncReply.DROP, it should unref the message, else the message should not be unreffed by the sync handler.

Parameters:

bus (Gst.Bus)

the Gst.Bus that sent the message

message (Gst.Message)

the Gst.Message

user_data (variadic)

user data that has been given, when registering the handler

Returns (Gst.BusSyncReply)

Gst.BusSyncReply stating what to do with the message


The results of the search are